One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...

Industrial demands for more compact heat exchangers are a motivation to find new technology features. Electrohydrodynamics (EHD) is introduced as a promising phenomenon for heat transfer enhancement mechanisms. Similar to any new technology, EHD has not been understood completely yet and requires more fundamental studies. In boiling phase change phenomena, nucleation is the dominant mechanism i...

Abstract   An empirical investigation was carried out to study convective heat transfer of nanofluid flow inside an inclined copper tube under uniform heat flux condition. Required data are acquired for laminar and hydrodynamically fully developed flow inside round tube. The stable CuO-base oil nanofluid with different nanoparticle weight fractions of 0.5%, 1% and 2% was produced by means of ul...

The excellent performance of fluidized bed heat exchangers is due to the interaction between particles and heat transfer surface and to the mixing effects in the viscous sublayer. In this paper, the results of experimental investigations on heat transfer for a wide range of Newtonian and non-Newtonian (shear-thinning power law) fluids are presented. New design equations have been developed ...

  In this numerical study the the heat transfer and laminar nanofluid flow in the three-dimensional microchannels with triangular cross-section is simulated. For increase the heat transfer from the walls of the channel, semiattached & offset mid- truncated rib,s Placed in the canal, and the tooth geometry and the impact is studied. In this study, the water is base fluid, and the influence of th...

In this paper, an attempt has been made to estimate the convective heat and mass transfer for pool boiling of sugarcane juice during preparation of jaggery. An indoor experiment was conducted to measure (i) the mass of evaporated water, (ii) the temperature of the sugarcane juice, (iii) the relative humidity above the sugarcane juice surface and (iv) the temperatures at the bottom and side of t...

high temperatures are often encountered in almost all of the combustion systems, therefore, thermal radiation heat transfer can influence the droplets heat up rate and consequently their life time. in this paper, the effect of thermal radiation heat transfer is investigated for two cases of directional and spherically symmetric illuminations. the flow and temperature fields insdie and outside o...

The present study attempts to improve heat transfer efficiency of a domestic gas burner by enhancing heat transfer from flue gases. Heat transfer can be augmented using the obstacles that are inserted into the flow field near the heated wall of the domestic gas burner. First, to achive the maximum efficiency, the insert geometry is optimized by the multi-objective genetic algorithm so that heat...