Nd2Fe14B/α-Fe-based hard/soft nanocomposite magnets with Co addition have been prepared by ball-milling and warm compaction. It was found that Co addition into the magnetically hard phase improves magnetic properties significantly, especially the remanence ratio and coercivity. The effect on the magnetic properties of the selective Co addition may be attributed to enhanced interdiffusion across...

The effects of the coating surface orientation α-Fe soft magnetic layer on Sm(Fe0.8Co0.2)12 hard phase and volume fraction α-Fe, VFe, maximum energy product, (BH)max exchange-coupled Sm(Fe0.8Co0.2)12/α-Fe nanocomposite magnet particles were micromagnetics OOMMF package was systematically investigated. reference model, without Fe layer, 630 kJ/m3. In contrast, in particle model with layers both ...

This study introduced a method based on magnetic field assisted finishing mechanism for micromachining the inner surfaces of Aluminum tubes. In this approach, using the alternating magnetic field of an AC electromotor, abrasive particles were formed as Magnetic Rods (Magnetic Clusters) and surface micromachining was carried out by the dynamic particular pattern made by an alternating magnetic f...

1387-1811/$ see front matter 2012 Elsevier Inc. A http://dx.doi.org/10.1016/j.micromeso.2012.03.052 ⇑ Corresponding authors. E-mail addresses: [email protected] (C.W. Jo ch.edu (S. Nair). The effect of typical membrane processing conditions on the structure, interfacial morphology, and gas separation performance of MOF/polymer nanocomposite membranes is investigated. In particular, the ZIF...

A cotton-like ZnO/SnO2 nanocomposite was grown by the carbothermal evaporation of a mixture of ZnO and SnO2 powders at 1100oC by the vapour-liquidsolid process, in which the Sn particles produced by the reduction of SnO2 act as the catalyst. Field-emission scanning electron microscope images suggest that the composites are made of microfibre-nanowire junction arrays. The structure is formed due...

In this study, the synthesis, characterization and controlled release behavior of new Hollow Silica Nano particles (HSNPs) and Magnetic Silica Nano Particles (MSNPs) were studied. Magnetic Silica Nano particles (MSNPs), as drug delivery vehicles, were synthesized through the coating of Fe3O4 nano-crystals with silica layers. The HSNPs were obtained by removal of Fe3O4 templates with hydrochlori...

In this study, we demonstrate the application of newly developed magnetic potassium substituted hydroxyapatite (KHA/Fe3O4) for the extraction of phthalate esters (PE) from water samples. Nanoparticles of KHA were synthesized through an easy alkoxide–based sol–gel technique. The structure of nanocomposite was characterized by X–ray diffraction (XRD), Fourier transform infrared (FTIR) analysis, a...

BACKGROUND This article reports the authors' development of nanofillers and a resulting nanocomposite. They measured the nanocomposite's properties in vitro in comparison with those of several existing composites (hybrids, microhybrids and microfill). METHODS The authors developed two types of nanofillers: nanomeric particles and nanoclusters. They used optimal combinations of these nanofille...

BACKGROUND Iron oxide nanoparticles are of considerable interest because of their use in magnetic recording tape, ferrofluid, magnetic resonance imaging, drug delivery, and treatment of cancer. The specific morphology of nanoparticles confers an ability to load, carry, and release different types of drugs. METHODS AND RESULTS We synthesized superparamagnetic nanoparticles containing pure iron...