The dynamic problem of thermo-elastic-viscous-plastic deformation shallow composite shells is formulated using the refined theory bending. In this case, tangential displacements along thickness constructions are approximated by polynomials third and higher orders, deflection does not depend on transverse coordinate. Normal stresses in composition have a linear distribution over thickness. tempe...

In this paper, the stress concentration around a hole in the single layer composite materials with long fibers is examined. The single layer has an infinite length, limited with and instant thickness and is loaded by a constant tension force p at infinity. The width of the lamina is considered to be finite and bears a hole as a defect. Due to presence of excessive shear stress in the matrix bay...

This study evaluated the optical density of two microfilled and two microhybrid resins, as well as the composition of these materials with regard to their optical density. Cavities prepared in 12 2-mm- or 4-mm-thick acrylic plastic plates were filled with Z250 (3M-ESPE), A110 (3M-ESPE), Charisma (Heraeus-Kulzer) and DurafillVS (Heraeus-Kulzer). The resin increments (2-mm-thick) were light-cured...

Chirped fibre Bragg grating (CFBG) sensors have been embedded within the adhesive bondline of single-lap bonded composite joints, fabricated using a transparent glass fibre reinforced plastic (GFRP) adherend bonded to a carbon fibre reinforced plastic (CFRP) adherend. During fatigue cycling, disbonds initiated adjacent to the cut ends of one, or both, of the adherends and the disbonds propagate...

The usages of the composite materials range from simple household to light-to-heavy industrial purposes including oilfield applications. The objective of this study is to evaluate current and potential uses of composite materials for the petroleum industry. This article gathered all the available composite materials that are normally used specially in oilfield and surface pipeline applications....

Non-biodegradable plastic aggregates made of polyethylene terephthalate (PET) waste from beverage containers are used as partial replacement of natural aggregates in mortar. Various weight fractions of sand 5%, 10%, 15% and 20% are replaced by the same weight of plastic. This paper investigates the mechanical properties of the obtained composites. The main results of this study show the feasibi...

The initial microstructure and mechanical properties of composite powders have a vital role in determining the microstructure and mechanical properties of the subsequent consolidated bulk composites. In this work, Al-based matrix composite powders with a dense and uniform distribution of metallic glass nanoparticles were obtained by high-energy milling. The results show that high-energy milling...

Introduction: Plastic surgery and its acceptance have been increasing in recent years. People have different psychological problems. In recent years, studies have emerged on this group of people. However, there is no tool that can assess the acceptance of plastic surgery. Objectives: The aim of this study is to determine the factor structure and psychometric properties of the Iranian version o...

Internal friction in aluminum thin films on silicon substrates has been measured uaween 180 and 360 K as a function of strain amplitude. The amplitude dependence of internal fnction in the aluminum films has been evaluated from the data on the film-substrate composite and further converted into the plastic strain of the order of as a function of the effective stress on dislocation motion. The m...