The conducted Electromagnetic interference (EMI) emission due to the usage of a fixed frequency Pulse Width Modulation (PWM) controller in a buck switching power supply is studied .The study is based on the variations of PWM waveform due to those of input Voltage, reference Voltage,and load.Line Impedance Stabilization Network (LISN) is introduced to be employed in EMI measurement. An equivalen...

A robust controller for a single-phase Pulse-Width Modulation (PWM) inverter is designed. The single-phase PWM inverter generates an AC sinusoidal output from a DC link voltage. Robustness of the output waveform against load variations and minimum Total Harmonic Distortion (THD) are the main goals in this design. The importance of this design methodology results from the changes in the inverter...

This paper combines quasi-Z-source into a typical five-level inverter, which includes two dc voltage sources, two quasi-Z-sources and five switching devices. In this structure, the output voltage amplitude is not limited to dc voltage source and it can be increased by quasi-Z-source. Besides, due to nature of Z-source families, this new structure is reliable and higher efficiency. Also, in this...

In this thesis a predefined design parameters are used to present theoretical guidelines for design of low voltage, and low power DC-DC converter with high power efficiency and low levels of EMI (Electro-Magnetic Interference). This converter is used to alter the DC voltage supplied by the power source. Several DC-DC converters of different types and topologies are described and analyzed. Switc...

This paper deals with the performance analysis of three phase induction motor drive fed by a PWM voltage source inverter. The PWM method, which involves the modulation of conventional sinusoidal reference signal and a triangular carrier is used here to produce pulse width modulated output only for under modulation index. This paper work deals mainly with the performance analysis of three phase ...

The simple Selective Harmonic Elimination (SHE) for 3-Phase Voltage Source Inverter (VSI) is presented here. The proposed work is to examine the Selective Harmonic Elimination (SHE) and to eliminate harmonics produced by Pulse Width Modulation (PWM) inverter. The selective harmonic elimination method for three phase Voltage Source Inverter (VSI) is generally based on ideas of opposite harmonic ...

In this paper we present a dual-mode thirdorder continuous time Σ∆ modulator that combines noise-shaping and pulse-width-modulation (PWM). In our 0.18 μm CMOS prototype chip the clock frequency equals 1GHz, but the PWM carrier is only around 125 MHz. By adjusting the loop filter, the ADC bandwidth can be set to 5 or 10 MHz. In the 5 MHz mode the peak SNDR equals 64dB and the dynamic range 71dB....

Passivity{based feedback controllers are derived for the indirect stabilization of the average output voltage in Pulse{Width{Modulation (PWM) controlled dc{to{dc power converters of the \boost", \buck{boost" and \buck" types. The controller design is carried out on the basis of well known average PWM models of such circuits. These models are shown to be Euler{Lagrange systems corresponding to a...

This paper discusses the presence of steady-state limit cycles in digitally controlled pulse-width modulation (PWM) converters, and suggests conditions on the control law and the quantization resolution for their elimination. It then introduces single-phase and multi-phase controlled digital dither as a means of increasing the effective resolution of digital PWM (DPWM) modules, allowing for the...

The paper presents a space-vector pulse width modulation (SVPWM) inverter feeding a permanent-magnet synchronous motor (PMSM). The SVPWM inverter enables to feed the motor with a higher voltage with low harmonic distortions than the conventional sinusoidal PWM inverter. The control strategy of the inverter is the voltage / frequency control method, which is based on the space-vector modulation ...