Some of the geotechnical parameters used in the analysis may not be accurately measured directly from laboratory tests due to effects of sample disturbance and errors of tests. The back analysis or the observational method are thus often applied to determine the representative and/or dominant strength parameters based on field observations in practice. Based on the Hoek-Brown failure criterion,...

the rock masses in a construction site of underground cavern are generally not continuous, due to the presence of discontinuities, such as bedding, joints, faults, and fractures. the performance of an underground cavern is principally ruled by the mechanical behaviors of the discontinuities in the vicinity of the cavern. during underground excavation, many surrounding rock failures have close r...

The effects of CO2-water-rock interactions on the mechanical properties of shale are essential for estimating the possibility of sequestrating CO2 in shale reservoirs. In this study, uniaxial compressive strength (UCS) tests together with an acoustic emission (AE) system and SEM and EDS analysis were performed to investigate the mechanical properties and microstructural changes of black shales ...

S resulting in sinkholes within dissolution mine fields in and around the city of Hutchinson, Kansas, USA (Figure 1) has been reported for more than 90 years. Salt dissolution and the resulting unpredictable upward migration of the dissolution voids can be observed both in proximity to well bores (dissolution mining, brine disposal, and oil wells; seismic shot holes, etc.) and in areas known to...

Supports for deep mine roadways located in soft surrounding rock face several problems: difficulty in applying pre-tightening force, low bearing capacity, and poor initial support. To solve these problems, this study proposes a high-pressure pre-tightening resin anchor with a compressed grouting body for use in soft and fractured rock surrounding a deep roadway. Using model experiments, we anal...

Abstract. The purpose of the Wedge Splitting Test (WST) is to generate stable mode I fracture crack along a pre-established path, and be able to measure the specific fracture energy parameter of the material GF. The test is performed on standard cylindrical notched specimens. In order to make decision on the optimal notch geometry for a specific rock test, a number of WST experiments were simul...

The effects of CO₂-water-rock interactions on the mechanical properties of shale are essential for estimating the possibility of sequestrating CO₂ in shale reservoirs. In this study, uniaxial compressive strength (UCS) tests together with an acoustic emission (AE) system and SEM and EDS analysis were performed to investigate the mechanical properties and microstructural changes of black shales ...

the paper is concerned with the hydrogeological appraisal of the proposed mining operations in thethar lignite field in sindh, pakistan. the thar coalfield covers an area of approximately 9000km2 andcontains three lignite seams lying at depth of 130m to 250 m. in the thar lignite field, the presence ofthree main aquifers induces pore pressure in the rock mass surrounding the lignite seams and m...