let $g$ be a finite group‎. ‎we denote by $psi(g)$ the integer $sum_{gin g}o(g)$‎, ‎where $o(g)$ denotes the order of $g in g$‎. ‎here we show that‎ ‎$psi(a_5)< psi(g)$ for every non-simple group $g$ of order $60$‎, ‎where $a_5$ is the alternating group of degree $5$‎. ‎also we prove that $psi(psl(2,7))

during the design and development of truck cabins, the safety of the driver and the front seat passenger in an accident is an important task and should be considered. the cab must be designed in such a way that in an accident a sufficient survival space is guaranteed. the aim of this study is to investigate the behavior of iran khodro (ikco) 2624 truck subjected to a complex crash test accordin...

afinite element model is developed for simulation of the curing process of a thick axisymmetric rubber article reinforced by metal plates during the molding and cooling stages. the model consists of the heat transfer equation and a newly developed kinetics model for the determination of the state of cure in the rubber. the latter is based on the modification of the well-known kamal-sourour mode...

metal forming processes, compared with machining ones, reduce production steps and increasemanufacturing speed in addition to saving raw material. in this paper, forming process of column ofa steering mechanism is investigated by finite element analyses and experimental tests; andoptimum die design parameters are found. forming process parameters including die opening angle,bearing length, clea...

In this study a series of ambient vibration tests on the triple ferrocement elevated water tanks with 150 cubic meters volume, is carried out. In order to verify the dynamic characteristics of full, half-full and one full tanks (mass eccentric system), the different arrangements of sensors are used. The effects of base rotation are also considered in the tests. Natural frequencies and mode shap...

A reliability analysis of suspension bridges against buffeting failure due to gustiness of wind velocity is carried out using the concept of PRA (probabilistic risk analysis) procedure. For this purpose, the bending stresses at the critical nodes of the bridge deck are obtained for buffeting forces using a spectral analysis technique and a finite element approach. For the purpose of reliability...

In recent years, impedance measurement method by piezoelectric (PZT) wafer activesensor (PWAS) has been widely adopted for non-destructive evaluation (NDE). In this method, theelectrical impedance of a bonded PWAS is used to detect a structural defect. The electro-mechanicalcoupling of PZT materials constructs the original principle of this method. Accordingly, the electricalimpedance of PWAS c...

in this paper, the axisymmetric corrugated diaphragm using finite element method will be discussed, so that half of these diaphragms’ cross sections and later the applied pressure will be considered. following this, using the consequent equations and visual basic software, a computer program will be provided which receives the diaphragms’ particulars such as diameter, thickness, pressure and th...

abstract- mechanical damage degrades fruit quality in the chain from production to the consumption. damage is due to static, impact and vibration loads during processes such as harvesting, transportation, sorting and bulk storage. in the present study finite element (fe) models were used to simulate the process of static bruising for apple fruits by contact of the fruit with a hard surface. thr...

let $g$ be a finite group‎. ‎we denote by $psi(g)$ the integer $sum_{gin g}o(g)$‎, ‎where $o(g)$ denotes the order of $g in g$‎. ‎here we show that‎ ‎$psi(a_5)< psi(g)$ for every non-simple group $g$ of order $60$‎, ‎where $a_5$ is the alternating group of degree $5$‎. ‎also we prove that $psi(psl(2,7))