the objective of this research is characterizing the effect of nano-zinc oxide (nano-zno) dispersions on leach resistance and contact angle of beech wood (fagus orientalis lipsky). the beech wood was cut into standard dimension, and oven dried after treating with nano-zno solution, based on immersion method. three treating nano-zno solution levels: (o, 20000 and 40000 ppm), and two thermal trea...

wettability alteration is one of the most important methods for oil recovery from sandstone andcarbonate reservoirs. the effects of salinity, ph, temperature, and chemicals such as surfactants andfatty acids on the alteration of the wettability were described in previous studies. in recent years,attention has been directed to nanoparticles as a wettability alteration agent. the effect of somena...

a superhydrophobic aluminum surface was fabricated through an enhanced low-cost approach and the effects of several relevant factors on static contact angle and sliding angle were investigated. first, the operating parameters including the etching time as well as the reaction time and temperature were varied. next, the so-called chemical factors including three different fatty acids and five di...

the influence of maleic anhydride-polypropylene (mapp) (0, 2, 3 and 5%) as a compatibilizer on the wettability of polypropylene/wood flour/glass fiber hybrid composites was studied by using the contact angle determination technique. sample slats with a cross section of 10×70 mm were made by a twin screw extruder. specimens were conditioned at room temperature and the angles between the water dr...

a novel computational fluid dynamics and molecular kinetic theory (cfd-mk) method was developed to simulate the impingement of a nanodroplet onto a solid surface. a numerical solution of the navier–stokes equation using a volume-of-fluid (vof) technique was used to model nanodroplet deformation. dynamic contact angle during droplet impact was obtained by molecular kinetic theory. this dynamic c...

Among one dimensional nanomaterials, TiO2 nanorods have found important applications in various industries due to optical, photocatalyst and self-cleaning properties. In this research, at first TiO2 nanorods were synthesized on a glass substrate by hydrothermal method. Then a thin film of TiO2 particles was dip coated (as seed layer) on the substrate. After that, hydrothermal synthesis of TiO2 ...

A superhydrophobic aluminum surface was fabricated through an enhanced low-cost approach and the effects of several relevant factors on static contact angle and sliding angle were investigated. First, the operating parameters including the etching time as well as the reaction time and temperature were varied. Next, the so-called chemical factors including three different fatty acids and five di...