This paper sheds more light on the co-rotational element formulation for beams with uniform cross-section. The co-rotational elements are commonly used in problems in which a structure undergoes a large deformation. In this study, the foregoing element obeys the Euler-Bernoulli beam assumptions. Unlike the formulations presented in the literature, in this paper, a number of local nodal coordina...

Abstract A simple method is proposed to model the open cracked beam structures. In this method, crack is modeled as a beam element. Hence cracked beam can be assumed to be a beam with stepped cross sections, and problem of determining natural frequency and mode shape of cracked beam, can be solved as determining these characteristics for a beam with different length and cross section. With this...

A triangular model base on an investigation which has done by Sinha et al. has been developed for evaluating embedded crack localization in beam-column structures. In the assessment of this member’s behavior, the effects of displacement slope are necessary. In order to propose a crack localization method for embedded crack, an efficient static data based indicator is proposed for this crack in ...

In this study, a novel and very simple finite element procedure is presented for free vibration and buckling analysis of slim beam-like structures damaged by edge cracks. A cracked region of a beam is modeled using a very short element with reduced second moment of area (I). For computing reduced I in a cracked region, the elementary theory of bending of beams and local flexibility approach are...

Transient thermal field in laser surface hardening treatment of medium carbon steel was analyzed by employing both three-dimensional analytical model and finite element model. In finite element model the laser beam was considered as a moving plane heat flux to establish the temperature rise distribution in the work-piece, while in analytical model laser beam was considered as an internal heat s...

In this paper, a comparison of weak-form Galerkin and least-squares finite element models of Timoshenko beam theory with the von Kármán strains is presented. Computational characteristics of the two models and the influence of the polynomial orders used on the relative accuracies of the two models are discussed. The degree of approximation functions used varied from linear to the 5th order. In ...

In this paper‎, ‎the static bending‎, ‎free vibration‎, ‎and dynamic response of functionally graded‎ ‎piezoelectric beams have been carried out by finite element method‎‎under different sets of mechanical‎, ‎thermal‎, ‎and electrical‎ ‎loadings‎. ‎The beam with functionally graded piezoelectric material‎ ‎(FGPM) is assumed to be graded across the thickness with a simple‎ ‎power law distributio...

experiments were carried out to observe the influence of loading type on concrete beam specimens. beam specimens made of similar concrete mixture with the same geometry were tested under three point static loading and low velocity drop weight impact loading. load – displacement behavior, absorbed energy dissipation capacity, stiffnesses, failure modes of beam specimens were obtained and discuss...