Although catalyst deactivation rate greatly varies depending on many factors, including the catalyst structure, reactor feed composition, and operating conditions; it is usually inevitable. Since catalyst deactivation modeling has so far been poorly addressed in the literature, in the present study, nine experimental sets of cobalt based Fischer-Tropsch catalysts activity-time data were conside...

accelerated deactivation of co/al2o3 catalysts in fischer-tropsch synthesis and the effect of re and ru as the catalytic promoters are reported. 15wt% co/al2o3 catalyst and 1wt% ru and 1.4wt% re  promoted cobalt catalysts have been formulated and extensively characterized. the deactivation of the unpromoted cobalt catalyst and those promoted with re and ru were studied by accelerated method at ...

Accelerated deactivation of Co/Al2O3 catalysts in Fischer-Tropsch synthesis and the effect of Re and Ru as the catalytic promoters are reported. 15wt% Co/Al2O3 catalyst and 1wt% Ru and 1.4wt% Re  promoted cobalt catalysts have been formulated and extensively characterized. The deactivation of the unpromoted cobalt catalyst and those promoted with ...

The effects of electronic properties of inner and outer surfaces of Carbon Nano Tubes (CNTs) on the deactivation of cobalt Fischer-Tropsch (FT) catalysts were studied. The comparative characterization of the fresh and used catalysts by TEM, XRD, TPR, BET and H2 chemisorption showed that cobalt re-oxidation, cobalt-support interactions and sintering are the main sources o...

Biomass is a possible renewable alternative to fossil carbon sources. Today, many bio-resources can be converted to direct substitutes or suitable alternatives to fossil-based fuels and chemicals. However, catalyst deactivation under the harsh, often liquid-phase reaction conditions required for biomass treatment is a major obstacle to developing processes that can compete with the petrochemica...

Deactivation of commercially relevant cobalt catalysts for Low Temperature Fischer-Tropsch (LTFT) synthesis is discussed with a focus on the two main long-term deactivation mechanisms proposed: Carbon deposits covering the catalytic surface and re-oxidation of the cobalt metal. There is a great variety in commercial, demonstration or pilot LTFT operations in terms of reactor systems employed, c...

Herein we investigate the use of CuO-ZnO-Al2O3 (CZA) with different solid acid catalysts (NH4ZSM-5, HZSM-5 or γ-Al2O3) for the production of dimethyl ether from syngas. It was found that of the solid acids, which are necessary for the dehydration function of the admixed system, the CZA/HZSM-5 bifunctional catalyst with a 0.25 acid fraction showed high stability over a continuous period of 212 h...

The stability of palladium supported on ceria (Pd/CeO2) was studied during liquid flow transfer hydrogenation using primary and secondary alcohols as hydrogen donors. For primary alcohols, the ceria support was reduced to cerium hydroxy carbonate within 14 h and was a contributing factor toward catalyst deactivation. For secondary alcohols, cerium hydroxy carbonate was not observed during the s...

hydrogen can be produced for fuel cell applications by using methanol steam reforming reaction. in this article, a method was developed for regeneration of accelerated deactivated methanol-steam-reforming catalyst. successive deactivation–regeneration cycles were studied in a 250 hours test for the first time including 6 regeneration cycles. it is shown that regeneration of the catalyst in dilu...

The massive consumption of fossil fuels and associated environmental issues are leading to an increased interest in alternative resources such as biofuels. The renewable biofuels can be upgraded from bio-oils that are derived from biomass pyrolysis. Catalytic cracking and hydrodeoxygenation (HDO) are two of the most promising bio-oil upgrading processes for biofuel production. Heterogeneous cat...