Rheological studies of the ceramic based concentrated titania nanoparticle dispersions showed a clear correlation between molecular structure of the cationic polymers used as dispersants and the viscosity of the slurries. Dynamic viscosity of the electrostatically stabilized alkaline (pH 10.0) dispersions of the bare titania nanopowders with a solid loading of 15 – 25 wt.% was rather high (abou...

Particles are important additives for altering and enhancing the properties of polymers. When the particle size approaching the fundamental length scale of the material, new mechanical, optical, and electrical properties arise, which are not present in the conventional macroscopic counterpart. For example, the dielectric constant of a polymer fluid can be increased by addition of ceramic nanopa...

The Si-coated SiC (Si-SiC) composite nanoparticle was prepared by non-transferred arc thermal plasma processing of solid-state synthesized SiC powder and was used as a sintering additive for SiC ceramic formation. Sintered SiC pellet was prepared by spark plasma sintering (SPS) process, and the effect of nano-sized Si-SiC composite particles on the sintering behavior of micron-sized SiC powder ...

Magnesium oxide nanocubes are compressed along the [001] direction in situ transmission electron microscope. Incipient plasticity smaller samples is characterized by nucleation of few 1/2<110>{110} dislocations while a larger number line defects observed nanocubes. Yield and flow stresses scattered stochastically above minimum value varying as inverse sample size. The upper bound given reduced ...

The addition of inorganic spherical nanoparticles to polymers allows the modification of the polymers physical properties as well as the implementation of new features in the polymer matrix. This review article covers considerations on special features of inorganic nanoparticles, the most important synthesis methods for ceramic nanoparticles and nanocomposites, nanoparticle surface modification...

Cryogenic scanning electron microscopy (cryo-SEM) was used to investigate microstructure development of composite coatings prepared from dispersions of antimony-doped tin oxide (ATO) nanoparticles (approximately 30 nm) or indium tin oxide (ITO) nanoparticles (approximately 40 nm) and latex particles (polydisperse, D(v): approximately 300 nm). Cryo-SEM images of ATO/latex dispersions as-frozen s...

Related Articles Probing electron-phonon coupling in metals via observations of ablation plumes produced by two delayed short laser pulses Appl. Phys. Lett. 99, 081502 (2011) Luminescence properties and optical dephasing in a glass-ceramic containing sodium-niobate nanocrystals J. Appl. Phys. 109, 113108 (2011) Multimodal plasmon coupling in low symmetry gold nanoparticle pairs detected in surf...

A fiber made by Furnace CVD was codoped with Erbium and Magnesium using a Flash Vaporization System for the first time. The fiber core is spontaneously formed as a Transparent Glass Ceramic (TGC). Due to the small nanoparticle size (<50 nm) and high volumetric density (10~10 m), the optical loss due to scattering is as low as < 0,6 dB/m. Erbium ions are highly concentrated within phase-separate...

The dissipated electric power in oxide powder compacts, subjected to flash sintering, is several hundreds of W·cm-3. This power is analyzed considering local softening/melting and transient plasma/liquid formation at the particle contacts due to thermal runaway. The sudden increase in compact electric conductivity and dissipated power referred to current percolation through the softening/liquid...