In this study, an analytical model is developed to study crack breathing behavior under the effect of crack location and unbalance force. Crack breathing behavior is determined using effectual bending angle by studying the transient change in closed area of the crack. The status of the crack of a balanced shaft is symmetrical about shaft rotational angle and the duration of each crack status re...

The work involves develops attended by a numerical execution of the eXtend Finite Element Method premises a measurement by the fracture process cracked so many cracked plates an application will be processed for the calculation of the stress intensity factor SIF. In the first we give in statically part the distribution of stress, displacement field and strain of composite plate in two cases unc...

The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...

On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...

The purpose of this study is to investigate bending moment and the axial load capacity of a pressurized pipe suffering from a through-wall circumferential crack repaired by a composite sleeve. The three-dimensional finite element method (FEM) was adopted to compute the results, and the failure assessment diagram (FAD) was employed to investigate the failure behavior of the repaired pipe. The fi...

Cohesive-zone models have been used to study the effects of strength and toughness on the delamination of beam-like geometries. The conditions under which linear-elastic interfacial mechanics provide a good frame-work for predicting failure of such systems have been studied. It has been determined that the phase angle derived from LEFM calculations provides an excellent description of the parti...

A two dimensional finite model with inclined crack at different crack angles are being analyzed in mixed mode condition using photo elasticity method for the determination of Stress Intensity Factors. The well-known Sih’s equation and three points deterministic approach is used for the determination of stress intensity factors. The effects of biaxial load factor, crack angle, size factors were ...

In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...

this paper presents a finite element analysis and its related experimental test of corrugated steel web beams subjected to fatigue loading. a particular focus in this study was set on the fatigue failure arising from the web-to-flange welded joint of the corrugated steel web beam. a detailed three-dimensional finite element model which explicitly includes the geometry of the web-to-flange welds...