ÐFatigue crack initiation and multiplication of the unnotched SCS-6 silicon carbide ®ber-reinforced titanium matrix composites with di€erent matrix and interfacial properties have been investigated experimentally and analytically. Ti±15V±3Al, Ti±6Al±4V, and Ti±22Al±23Nb were chosen as matrix materials. The initiation and propagation of each individual matrix crack as a function of fatigue cycle...

The natural initiation and growth of short cracks in Inconel 718 U-notch specimens has been studied at 600C in air. U notches were introduced through broaching, and hardness traces and optical microscopy on cross sections through the U notch broaching showed that the broaching process had introduced a deformed, work hardened layer. Fatigue tests were conducted under load control using a 1-1-1-1...

The unexpected failures of structural materials in very high cycle fatigue (VHCF) regime have been a critical issue in modern engineering design. In this study, the VHCF property of a Cr-Ni-W gear steel was experimentally investigated under axial loading with the stress ratio of R = -1, and a life prediction model associated with crack initiation and growth behaviors was proposed. Results show ...

the cracked brazilian disc (cbd) specimen is widely used in order to determine mode-i/ii and mixed-mode fracture toughness of a rock medium. in this study, the stress intensity factor (sif) on the crack-tip in this specimen is calculated for various geometrical crack conditions using the extended-finite element method (x-fem). this method is based upon the finite element method (fem). in this m...

There is an increasing need to assess the service life of components containing defect which operate at high temperature. This paper describes the current fracture mechanics concepts that are employed to predict cracking of engineering materials at high temperatures under static and cyclic loading. The relationship between these concepts and those of high temperature life assessment methods is ...

An assessment of the effects of microstructure on room temperature fatigue crack initiation and short crack propagation in a Ni-base superalloy is presented. The assessment was carried out on microstructural variants of U720Li, including as-received U720Li, U720Li-LG (large grain variant) and U720Li-LP (large intragranular coherent γ′ variant). Fatigue tests were carried out at room temperature...

in this work, the mechanism for fracture of brittle substances such as rocks under a uniform normal tension is considered. the oriented straight micro-cracks are mostly created in all the polycrystalline materials resulting from the stress concentrations. the present work focuses on the interactions of the pre-existing micro-cracks, which can grow and propagate within a rock-like specimen. the ...

Crack initiation in Ti-6242 has been observed to occur in a grain with a hard orientation for basal slip neighbouring a grain with a soft orientation. Because there is significant variability in microstructural features and crack initiation life, it is useful to explore the effects of the variability of the microstructural components through a probabilistic sensitivity analysis. In this paper, ...

It is considered that the process of fatigue fracture could be arranged the three classes, i.e., crack initiation, crack propagation and fracture. Of these the second process is important from the following point of view. (1) As has so far been reported in many publications, the importance of crack propagation process in total fatigue life increases in proportion to the increase in the stress c...