Collapse by buckling a quite common phenomenon in sheets under pressure. When these structures caused by defects such as corrosion and cracks the time of the occurrence of this phenomenon is sensitive and critical load to be significantly reduced. Therefore, in this article sheet of aluminum Al 1200 by cracks in a part of the sheet will be considered. Left angle on the critical buckling load ef...

The varestraint cracking test was carried out to assess the hot cracking tendency of alloy 800 at different welding conditions and augmented strain levels. The test results revealed that the hot cracking susceptibility of alloy 800 increases with increasing the heat input and augmented strain levels. This emphasizes the role of constraint either internally induced or externally applied to the w...

This paper aims to numerically investigate the structural behavior of reinforced high-strength concrete (HSC) beams retrofitted by Carbon Fiber Reinforced Polymer (CFRP) sheets after cracking. Six pre-cracked HSC with CFRP having identical reinforcement are tested four-point loading until failure using Abaqus software, besides two others without as control beams. attached on three beam sides in...

Cu3P/reduced graphene oxide (Cu3P/RGO) nanocomposite was successfully synthesized by a facile one-pot method as an advanced anode material for high-performance lithium-ion batteries. Cu3P nanostructures with a polyhedral shape with the mean diameter (80-100 nm) were homogeneously anchored on the surface of RGO. The flexible RGO sheets acted as elastic buffering layer which not only reduced the ...

The paper discusses the results of an experimental investigation carried out on reinforced concrete (RC) beams strengthened in shear by externally bonded fiber reinforced plastic (FRP) sheets. The study is devoted to analyze the role that the transverse steel reinforcement and the beam slenderness ratio could play on the resistant mechanism of RC beams strengthened in shear by FRP composites. T...

This paper proposes a 3-dimensional coarse grain model of microtubules and treats the tubulin monomer as a sphere of multiple patches, with parameters chosen to yield experimental values of bending and stretching stiffness. The model has demonstrated the ability to produce the bistability of tubulin sheets, elastic deformation near the tip, and cracking and peeling of protofilaments. This model...

Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...

Contact dermatitis is not a homogenous entity, but rather a number of subtypes contributing to different clinical presentations. For better understanding, instructional sheets provide information that assists in patient care. Informational sheets on contact dermatitis, patch testing, hand dermatitis, stasis dermatitis, and poison ivy are reviewed for open forum. Although often considered archai...