Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...

sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. but square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...

mold powders are fluxing agents used as raw materials in the steel industry, which play very important role inprocessing stability and final surface quality of a product. surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. heat flux across the interfacial gap depends on thermal properties of s...

The effect of partial slip and temperature dependent fluid properties on the MHD mixed convection flow from a heated, non-linearly stretching surface in the presence of radiation and non-uniform internal heat generation/absorption is investigated. The velocity of the stretching surface was assumed to vary according to power-law form. Thermal transport is analyzed for two types of non-isothermal...

an investigation on the thermal performance of the soil as geothermal heat energy storage medium has been conducted. the thermal characteristics of the soil storage and the heat transfer from a heat exchanger in the soil, surrounding and bottom surface will be discussed. this investigation forms a contribution to a project to realize such storage to be charged from a solar heating system. this ...

the effect of partial slip and temperature dependent fluid properties on the mhd mixed convection flow from a heated, non-linearly stretching surface in the presence of radiation and non-uniform internal heat generation/absorption is investigated. the velocity of the stretching surface was assumed to vary according to power-law form. thermal transport is analyzed for two types of non-isothermal...

in this paper the numerical analysis of flow and time dependent heat transfer of micro-tube conveying nanofluid in laminar flow is investigated. in this study, convection heat transfer of nanofluid and base fluid and transient analysis for time-varying heat flux for time step of 0.0001 second are elucidated. it is observed that the pumping power of nanofluid flowing and the maximum temperature ...

  In this paper the numerical analysis of flow and time dependent heat transfer of micro-tube conveying nanofluid in laminar flow is investigated. In this study, convection heat transfer of nanofluid and base fluid and transient analysis for time-varying heat flux for time step of 0.0001 second are elucidated. It is observed that the pumping power of nanofluid flowing and the maximum temperatur...

This paper presents the heat transfer coefficients and the pressure drop measured during HC-600a (Isobutane) condensation inside a brazed plate heat exchanger: the effects of saturation temperature, refrigerant mass flux and vapour super-heating are investigated. The heat transfer coefficients show weak sensitivity to saturation temperature and great sensitivity to refrigerant mass flux. At low...

in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...