Fracture toughness (K1C) of medium carbon steel (0.5% C) has been determined by round notched tensile specimen. Two notch diameters (5.6mm and 4.2mm) and three notch angles (α) namely 45, 60 and 75 have been used to observe the effect of notch diameters and notch angle on fracture toughness of the steel. By heat treatment the microstructure of the steel is also varied and its effect on the frac...

The purpose of this study was to investigate and analyse the fracture toughness of yttria stabilized tetragonal zirconia polycrystal (Y-TZP) dental ceramics by means of the Vickers indentation technique. Fracture toughness was analysed under the following loads: 29.42 N, 49.03 N, 196.13 N, and 294.20 N. Cracks that had developed from the vertices of a Vickers indentation were measured and used ...

Assessment of the correlation between rock brittleness and rock fracture toughness has been the subject of extensive research works in the recent years. Unfortunately, the brittleness measurement methods have not yet been standardized, and rock fracture toughness cannot be estimated satisfactorily by the proposed indices. In the present study, statistical analyses are performed on some data col...

In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...

Leaves as the main photosynthetic organ of plants must be well protected against various hazards to achieve their optimal lifespans. Yet, within-species variation and the material basis of leaf strength have been explored for very few species. Here, we present a large dataset of leaf fracture toughness from a species-rich humid tropical forest on Barro Colorado Island, Panama, reporting both am...

Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...

Biocompatible materials used for the fabrication of dental crowns were studied. Patients were treated with Gold, Porcelain and Zirconia crowns. Dental crowns were selected according to patient’s clinical status and needs. We found that Gold crowns had low patient acceptance because of poor aesthetics and high cost. Gold crowns could not be used opposite to amalgam restorations for the fear of g...

The fracture toughness of SLG filled phenolic composites have been determined by short bar tests. It is expensive to prepare the samples for the tests. Therefore, it is necessary to develop a mathematical model that will predict the fracture toughness of particulate filled phenolic composites. Mathematical models for tensile strength, Young’s modulus are available but not for impact strength an...

BACKGROUND/AIM Fracture toughness determines functional crown strenght and prevents damages on ceramics during mastication. There is a lack of relevant literature data about fracture toughness of crowns made by feather-edge preparation. Mechanical testing of ceramic samples is supposed to show if feather-edge tooth preparation is a successful method for making ceramic crowns without any risk of...