Near-surface mounted (NSM) bars have been used for flexural strengthening of reinforced concrete members. The data available on this type of reinforcement technique are limited and typically, the bars or strips are embedded using an epoxy. Long term durability, abrasion resistance, and compatibility of the repair are important issues with this type of repair. One untested option for embedding t...

Three Neuro-Fuzzy Inference Systems (ANFIS) including Grid Partitioning (GP), Subtractive Clustering (SCM) and Fuzzy C-means clustering Methods (FCM) have been used to predict the groutability of granular soil samples with cement-based grouts. Laboratory data from related available in litterature was used for the tests. Several parameters were taken into account in the proposed models: water:ce...

The paper provides a critical appraisal of the events surrounding the unexpected settlement of large-diameter monopile foundations for offshore wind energy converters, and will detail experimentation that is to be undertaken to determine the extent of the wear failure mode in such structures. The potential for wear deterioration at the grout-steel interface has been caused by the lack of axial ...

Pull-out experiments were performed on three carbon fiber-reinforced polymer (CFRP) ground anchors simulating their applications in different rock types which provided different confinement levels. The CFRP tendons comprised, on the ground side, a prefabricated conical anchor body of high-strength grout in which two CFRP straps were embedded. The anchors reached an average load-bearing capacity...

Synopsis An anchorage test programme carried out on the site of deep basement construction in Norwich, UK, allowed determination of anchorage capacities, creep characteristic data and the exhumation of several anchor bodies in chalk. This paper reports on the performance of the chalk based anchorages, the observation of exhumed grout body shapes and sizes, extent of grout penetration into disso...

Electro-osmosis in clayey soils and sediments, for purposes of clay consolidation, dewatering, or cleanup, and electro injection in porous media is widespread recent decades. It is experimentally found that the chemical properties of porous media especially PH change the characteristics of media. Electro-osmotic conductivity is a function of soil and grout material chemistry, altering with time...

The effectiveness of silica sol grout on mudstones is reported in this paper. Using X-ray diffraction (XRD), the study investigates how the silica sol grout modifies mudstone mineralogy. Micropore sizes and mechanical properties of the mudstone before and after grouting with four different materials were determined with a surface area/porosity analyser and by uniaxial compression. Tests show th...

A post-tensioning tendon duct filled with grout can effectively prevent corrosion of the reinforcement, maintain bonding behavior between the reinforcement and concrete, and enhance the load bearing capacity of concrete structures. In practice, grouting of the post-tensioning tendon ducts always causes quality problems, which may reduce structural integrity and service life, and even cause acci...

The greatest stability of in vitro plant materials with practical storage periods measured in decades can be achieved by cryogenic storage at ultra low temperatures. Liquid Nitrogen (LN) is the most common medium for cryostorage as it is relatively inexpensive and readily available (Withers, 1987; Panis and Lambardi, 2005). This process puts the cells in suspended animation where they can retai...

Synchrotron X-rays have been used to study the oxidation of uranium and uranium hydride when encapsulated in grout and stored in de-ionised water for 10 months. Periodic synchrotron X-ray tomography and X-ray powder diffraction have allowed measurement and identification of the arising corrosion products and the rates of corrosion. The oxidation rates of the uranium metal and uranium hydride we...