In this study, four types of grout were developed to evaluate the effect of grouting of saturated riprap layers on ground water flow. The developed types of grout are divided into a quick-setting type and a general-type, and also into high and low viscosities. A number of grout tests were performed in a model acrylic chamber, 0.4 m in diameter and 2.0 m in length, for visual observation of inje...

this study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using universal distinct element code (udec). the numerical model is validated using practical data and analytical method for grouting process. input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. the...

This study aims at presenting a numerical model for predicting grout flow and penetration length into the jointed rock mass using Universal Distinct Element Code (UDEC). The numerical model is validated using practical data and analytical method for grouting process. Input data for the modeling, including geomechanical parameters along with grout properties, were obtained from a case study. The...

Semi-flexible pavement surfacing is a composite pavement that utilizes the porous pavement structure of the flexible bituminous pavement, which is subsequently grouted with appropriate cementitious materials. This study aims to investigate the compressive strength, flexural strength, and workability performance of cementitious grout. The grout mixtures are designed to achieve high strength and ...

To improve the corrosion protection provided to prestressing strands, anti-bleed grouts are used to fill voids in post-tensioning ducts that result from bleeding and shrinkage of older portland cement grouts. Environmental differences caused by exposing the strands to dissimilar grouts, however, have the potential to cause rapid corrosion. Portland cement grout, gypsum grout, and four commercia...

Chemical grout use began seriously some thirty years ago with the use of only a few types; silicates, acrylamide, epoxy, and some fatty acid derivates. Since then, the kinds of grout have proliferated with some of the originals still there, others dropping out entirely, and still others changing in type. This paper is about the current uses of chemical grouts, the economics of product use, and ...

Bio-grout, a new ground improvement method, has been recently developed to improve the mechanical properties, decrease the permeability of porous materials, reinforce or repair cementitious materials and modify the properties of soil or sand. Bio-grout production depends on microbially induced calcite precipitation (MICP), which is driven mainly by an enzyme, urease. However, urease-based MICP ...

A vertical geothermal probe consists of two or four polyethylene tubes U-shaped, used for circulating the coolant between the heat pump and the ground. It is installed in a deep borehole and sealed in a special grout, a kind of liquid cement, used to seal the borehole, and avoid the presence of air bags between the probe and the ground. Moreover, the grout provides a heat transfer medium betwee...