A voltage regulator is developed to extend the operation range of a electrostatic actuator using a displacement feedback. The feedback actuator system can be used for continuous position tracking of step, ramp, or harmonic voltage signals. The electrostatic actuator is composed of a micro-cantilever beam electrode above a fixed electrode. The voltage difference between the two electrodes is reg...

A MEMS varactor using torsional beams for actuation is proposed. Analytical expression for electrostatic torque developed is derived. The structure is compared with existing structures for dynamic range and actuation voltage. It is demonstrated that the proposed varactor outperforms the other structures in terms of wide dynamic range and lower actuation voltage, coupled with ease of fabrication...

We propose an electrostatically-actuated microelectromechanical digital-to-analog converter (M-DAC) device with low actuation voltage. The spring structures of the silicon-based M-DAC device were monolithically fabricated using parylene-C. Because the Young's modulus of parylene-C is considerably lower than that of silicon, the electrostatic microactuators in the proposed device require much lo...

The impetus of this study is to investigate the chaotic behavior of a size-dependent nano-beam with double-sided electrostatic actuation, incorporating surface energy effect and intermolecular interactions. The geometrically nonlinear beam model is based on Euler-Bernoulli beam assumption. The influence of the small-scale and the surface energy effect are modeled by implementing the consistent ...

In this paper, the dynamic response of resonating nano-beams is investigated using a strain gradient elasticity theory. A nonlinear model is obtained based on the Galerkin decomposition method to find the dynamic response of the investigated beam around its statically deflected position. The mid-plane stretching, axial residual stress and nonlinear interaction due to the electrostatic force on ...

We present a new tri-electrode topology for reducing the control voltage for electrostatic actuators. Conventional parallel plate actuators are dual-electrode systems, formed by the MEMS structure and the drive electrode. By placing a perforated intermediate electrode between these elements, a tri-electrode configuration is formed. This topology enables a low voltage on the intermediate electro...

The paper deals with the mechanical behavior of a micro-beam bonded with two piezoelectric layers. The micro-beam is suspended over a fixed substrate and undergoes the both piezoelectric and electrostatic actuation. The piezoelectric layers are poled through the thickness and equipped with surface electrodes. The equation governing the micro-beam deflection under electrostatic pressure is deriv...

In this paper, we study the behaviour of a microcantilever beam under electrostatic actuation using finite difference method. This problem has a lot of applications in MEMS based devices like accelerometers, switches and others. In this paper, we formulated the problem of a cantilever beam with proof mass at its end and carried out the finite difference solution. we studied the effects of lengt...

This paper reports on the design of a novel ultra low actuation voltage, low loss radio frequency micro-electro-mechanical system (RF MEMS) capacitive shunt switch. The concept of the switch relies on a mechanically unconstrained armature actuated over a coplanar waveguide using electrostatic forces. The minimum actuation voltage of the switch is <2V, with an isolation of 40dB and insertion los...

Electrostatic actuation of motion is commonly used in resonant MEMS. Drive signal feed-through is undesirable as it masks the detection signal. This paper reports analysis and demonstration of a resonant motion excitation scheme, which uses a combination of a DC bias with a sinusoidal AC voltage, frequency of which is twice of the mechanical resonant frequency. This configuration is experimenta...