A model of fractional-order of thermoelasticity is applied to study a 2D problem of mode-I crack in a fibre-reinforced thermal environment. The crack is under prescribed distributions of heat and pressure. The normal mode analysis is applied to deduce exact formulae for displacements, stresses, and temperature. Variations of field quantities with the axial direction are illustrated graphically....

There are few experimental results to date describing the crack-propagation threshold behavior of short fatigue cracks under multiaxial loading conditions. To address this need, in the present study, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size and shape are reported for a Ti-6Al-4V turbine blade alloy, heat treated to two widely different microstructu...

There are few experimental results to date describing the crack-propagation threshold behavior of short fatigue cracks under multiaxial loading conditions. To address this need, in the present study, the variation in mixed-mode, high-cycle fatigue-crack growth thresholds with crack size and shape are reported for a Ti-6Al-4V turbine blade alloy, heat treated to two widely different microstructu...

In this work, fracture behavior of multilayered unidirectional graphite/epoxy composite (T800/3900-2) materials is investigated. Rectangular coupons with a single-edged notch are studied under geometrically symmetric loading configurations and impact loading conditions. The notch orientation parallel to or at an angle to the fiber orientation is considered to produce mode-I or mixed-mode (mode-...

In this paper a new method to determine the fracture properties and strain energy release rate for Carbon- Polyester composite has been introduced.  Fracture characteristics such as critical stress intensity factor and critical strain energy release rate for mode I, mode II and mixed mode loading were determined using Arcan type specimen. 130 layers of carbon fiber polyester woven composite wit...

Deformation twinning at the tip of a straight crack or notch is analyzed using a phase-field method that seeks equilibrium twin morphologies via direct minimization of a free energy functional. For isotropic solids, the tendency to twin under mode I or mode II loading is found to depend weakly on Poisson’s ratio and elastic nonlinearity and strongly on surface energy and twinning shear (i.e. ei...

Elastic and elastic-plastic results are obtained for a semi-infinite slanted through-crack propagating in a symmetrically loaded plate strip with the aim of providing theoretical background to commonly observed plate tearing behavior. Were it is not for the slant of the crack through the thickness of the plate, the problem would be mode I, but due to the slant the local conditions along the cra...

Mixed-mode, high-cycle fatigue-crack growth thresholds are reported for through-thickness cracks (large compared to microstructural dimensions) in a Ti±6Al±4V turbine blade alloy with a bimodal microstructure. Speci®cally, the e€ect of combined mode I and mode II loading, over a range of phase angles b ˆ tanÿ1…DKII=DKI† from 0° to 82° …DKII=DKI 0±7), is examined for load ratios (ratio of minimu...

This paper describes algorithms for threedimensional dynamic stress and fracture analysis using the material point method (MPM). By allowing dual velocity fields at background grid nodes, the method provides exact numerical implementation of explicit cracks in a predominantly meshless method. Crack contact schemes were included for automatically preventing crack surfaces from interpenetration. ...

Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...