Mixed-mode fracture of an adhesively-bonded structure made from a commercial adhesive and a dual-phase steel has been studied under different rates. Since mixedmode fracture occurs along the interface between the steel and adhesive, the cohesiveparameters for the interface were required. The mode-II interfacial properties were deduced in earlier work. In this paper the mode-I interfacial toughn...

The majority of fracture mechanics studies on the toughness of bone have been performed under tensile loading. However, it has recently been shown that the toughness of human cortical bone in the transverse (breaking) orientation is actually much lower in shear (mode II) than in tension (mode I); a fact that is physiologically relevant as in vivo bone is invariably loaded multiaxially. Since bo...

Composite materials are prone to delamination as they are weaker in the thickness direction. Carbon nanotubes (CNTs) are introduced as a multiscale reinforcement into the fiber reinforced polymer composites to suppress the delamination phenomenon. This review paper presents the detailed progress made by the scientific and research community to-date in improving the Mode I and Mode II interlamin...

In this chapter some of the standard procedures for delamination testing of unidirectional polymer composites will be examined. The main objective is to explore the possibilities of applying the standard testing methods to interlayer toughened composites and to establish parameters which may influence fracture toughness measurements. Existing standards for mode I and mode II delamination testin...

cracked and un-cracked brazilian disc specimens subjected to diametral compression were used for conducting fracture toughness and tensile strength experiments on a polymer concrete (pc) material. the value of mode i fracture toughness (kic) was determined from the center- cracked brazilian disc and the indirect tensile strength (σt) was obtained from the un-cracked brazilian disc specimen. the...

Fracture assessment of U- and V-notches is important in mechanical engineering. One can use the J-integral as fracture parameter in order to predict the critical fracture load in notches. The critical value of the J-integral in cracks is a function of the material properties. In notches, however, the material properties as well as the notch dimensions affect this critical value (named fracture ...

assessment of the correlation between rock brittleness and rock fracture toughness has been the subject of extensive research works in the recent years. unfortunately, the brittleness measurement methods have not yet been standardized, and rock fracture toughness cannot be estimated satisfactorily by the proposed indices. in the present study, statistical analyses are performed on some data col...

A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...

Interlaminar fracture mechanics has proven useful for characterizing the onset of delaminations in composites and has been used with limited success primarily to investigate onset in fracture toughness specimens and laboratory size coupon type specimens. Future acceptance of the methodology by industry and certification authorities however, requires the successful demonstration of the methodolo...

Assessment of the correlation between rock brittleness and rock fracture toughness has been the subject of extensive research works in the recent years. Unfortunately, the brittleness measurement methods have not yet been standardized, and rock fracture toughness cannot be estimated satisfactorily by the proposed indices. In the present study, statistical analyses are performed on some data col...