Nanofluids are colloidal suspensions of nanosized particles in the conventional base fluid such as water, engine oil and ethylene glycol. The nanoparticles include the chemically stable metals, metal oxides and nonmetallic. In the present study, the literature available on the applications of nanofluids in plate heat exchanger have been compiled and reviewed. However, this paper elaborates the ...

Convective heat transfer can be enhanced by changing flow geometry and/or by enhancing thermal conductivity of the fluid. This study proposes simultaneous passive heat transfer enhancement by combining the geometry effect utilizing nanofluids inflow in coils. The two nanofluid suspensions examined in this study are: water-Al2O3 and water-CuO. The flow behavior and heat transfer performance of t...

Heat Transfer has special importance in engineering applications. So, researchers have suggested different new idea to increase heat transfer and using nanofluid is one of these methods In recent years, new methods have been used. One of these methods is the use of nanofluids, ., because nanofluids have higher heat transfer potential than base conventional fluids. In this investigation effect o...

In this study, the thermal characteristics of turbulent nanofluid flow in a helical tube in the tube heat exchanger (HTTHE) were assessed numerically through computational fluid dynamics (CFD) simulation. The findings of both the turbulent models: realizable k-epsion (k-ε) and re-normalisation group (RNG) k-epsilon were compared. The temperature distribution contours show that realizable and RN...

fridges are used in various industries, and heat exchanger is one of the main components of these systems; therefore, efficiency analysis of these systems is very important. in many fridges, frost over the heat exchanger tubes or pipes affects the system operation and reduces heat transfer between the refrigerant and ambient, so defrosting systems are usually used to enhance heat transfer. desi...

this paper presents a comprehensive theoretical, experimental, and economic study on the application of nanofluids as heat transfer fluid in waste heat recovery systems. the research work was conducted in a steel-making complex in which a plate heat exchanger had been used to recover heat from hot process water. the system was theoretically modelled and the effects of using nanofluids as heat t...

A shell and tube heat exchanger is a class of heat exchanger designs seen most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows...

This paper presents an experimental investigation of convective heat transfer coefficient for nanofluids using spiral pipe heat exchanger. The aim of this study is to investigate experimentally flow and convective heat transfer characteristics of water-based nanofluids flowing through a spiral pipe. The test section consist of spiral pipe with ratio pitch per diameter is 7.0 and mean hydraulic ...

One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...