Due to the high uniformity demands, nickel deposition processes for producing reflector coatings often make use of dedicated plating cell configurations. Computer simulations can drastically speed up the trial and error stage for optimizing the plating cell design. In this paper, the nickel deposition distribution for a reflector application is simulated using the Elsyca PlatingMaster software ...

The first section of this chapter describes general pollution prevention techniques for plating solutions and covers housekeeping, monitoring, additives, equipment modification, and on-site recycling and recovery. The next section covers general issues in pollution prevention for cyanide-based plating. The next seven sections cover pollution prevention options for plating specific metals such a...

In the previous chapter, the components of electroless nickel plating baths were discussed from the viewpoint of the function each performs in the bath, with little attention paid to their effect on the plating process. The metal and the electron source (the reducing agent) are consumed in the electroless plating reaction and so their concentrations in the bath are continuously decreasing. Ther...

zinc-nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. in this work the effect of pulse parameters on the zn-ni alloy electrodeposits was investigated. the hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. the surface topography of the deposits was also observed in s...

Nickel plated copper heat spreader acts as a medium to dissipate heat from silicon die towards heat-sink. Electroless nickel plating requires catalytic activation before the nickel can be deposited onto copper. Different catalytic activation techniques such as galvanic initiation and thin nickel-copper electrodeposition have diverse impact on the thermal performance of the heat spreader. Surfac...

Electroless nickel plating baths have to be discarded when levels of phosphites build up and interfere with the plating process. OWMC funded research conducted at ORTECH International to determine whether phosphites could be removed from plating bath solution. The first attempt to do this by adsorption on flyash was unsuccessful. However, the use of calcium ion to precipitate calcium phosphite ...

In this paper, bath control is proposed for the electroless nickel plating through holes board process. The main parameters of the product (board) – thickness of the plating film and phosphorous content – are stabilized at constant levels using optimal tracking control. The set point for control is calculated from the model in dependence on the current state of the process. The pH-index and nic...

Nickel zone plates are fabricated by electrodeposition into a mold with high aspect ratio and narrow line width. This process requires high-mechanical stability of the mold to avoid pattern collapse in the plating bath. In the present paper we demonstrate how SU-8 can be used as plating mold material in a tri-layer resist to fabricate 35-nm half-pitch nickel gratings with an aspect ratio exceed...

The ability of Clinoptilolite powder to adsorb Ni (II) ions from wastewater which was taken from a nickel plating factory was investigated through batch experiments. The Ni (II) adsorption was found to be dependent on mass of adsorbent, contact time, pH value of solution and the speed of agitation. The experimental isotherms data were fitted into Langmuir and Freundlich models. The monolayer ad...