Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...

Capillary zone electrophoresis was used in the analysis of anions and cations in electroless plating bath samples. Examples described in this application note include the analysis of inorganic and organic anions in nickel-plating baths, cations in nickel-iron-cobalt-plating baths and metal-EDTA complexes in plating bath waste. Sample preparation was minimal, consisting merely of diluting the sa...

The authors report a method for monitoring, control, and end-point detection of electroplating in nanostructures. The method is demonstrated on nickel plating into polymer molds, which is an important process in the fabrication of soft x-ray zone-plate diffractive optics. The lack of reproducibility presently limits the achievable nickel aspect ratio and, thus, reduces the zone-plate diffractio...

Currently no reports are available from Egypt regarding occupational exposure to nickel and its effects on the liver. The aim of this study was to assess the liver function of workers occupationally exposed to nickel. Standard liver function tests were applied to blood samples from 25 nickel-plating workers in Damietta, Egypt and 30 administrative workers as a reference group. Levels of urine n...

The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Development Institute, its members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of a...

Nickel soft x-ray zone plates are fabricated by through-mask electroplating. The authors report on how a uniform nickel thickness can be obtained over the entire zone plate using pulse and pulse reverse plating. If the plating is carried out at a constant current the nickel thickness has been observed to decrease with radius. This results in lower outer zones and reduced diffraction efficiency ...

This paper deals with the preparation and characterization of Nickel-coated Alumina ceramic particles by Electroless Plating Technique. Nanosized α-Al2O3 powders of about 50nm in diameter are used for plating. The bath for Electroless Nickel Plating is prepared with NiCl2.6H2O, C6H5NaO7.H2O, NH4Cl and NaH2PO2.H2O. A bath temperature of 85°C, pH value of 8 and stirring time of 20 min is consider...

This paper presents a low cost process for fabrication of high efficiency silicon-based solar cells from front side ARC patterning through contact line metallization. This process utilizes a screen printable etch resist to define the contact pattern and a wet etching solution to remove the exposed ARC layer. The metallization stack for the contact line pattern consists of a nickel silicide ohmi...