High-density polyethylene pipes (HDPE), crossbonded polyethylene pipes (PEX) and polyvinyl chloride (PVC) pipes for drinking water were tested with respect to migration of volatile organic components (VOC) to water. The odour of water in contact with plastic pipes was assessed according to the quantitative threshold odour number (TON) concept. A major migrating component from HDPE pipes was 2,4...

This paper evaluates the added resistance of a torpedo shape AUV, moving inside a water pipeline, due to wall effects within the tube. Today, there are long length pipelines of water or petroleum that need to regular inspection. Early detection of failure will help to prevent breakdown and avoid the huge cost of an accident. As pipelines are enclosed environments and difficult to access, pipeli...

Steel pipes with circular cross-sections are usually used in cooling panels of electric arc furnaces. In the present study pipes with square cross-sections under equivalent conditions were used to obtain more information on the possibility of increasing the heat transfer and cooling efficiency. The results showed increased efficiency of the square pipe compared to the circular cross-section pip...

The safety of lifelines, as the most important urban facilities, under different conditions highly depends on the safe design and performance of these buried structures. This cannot be achieved unless their actual behaviors are well understood and considered at the designing stage. A new physical model was developed in Amirkabir University of Technology to study the behavior of buried pipes und...

in order to increase the efficiency of the conveyance of the granular solids, a new experimental set-up is designed. the test rig has longitudinal trapezoidal slots in its conveying pipes. through experimentation, a correlation for friction factor in terms of solid mass flow rate, fluid flow rate and froude number is presented. it is shown that the mixture friction factor for pipes with inner t...

corrosion makes huge economic and ecologic damage all over the world. biologic corrosion of sewer pipes is considered as a serious limitation in economic perspectives. to prevent biologic corrosive damage, lining techniques can be applied by materials and aggregate resistant to attack bacterially in sewer pipes. the role of bacteria is that they convert sulfur compounds into sulfuric acid which...

The present work investigates the effect of the elliptical three-dimensional (3D) cracks on a pipe with thickness transition, considering internal pressure. Level sets were defined using the extended finite element method (XFEM), the stress intensity factors (SIFs) of 3D cracks were investigated and compared between straight pipes and pipes with thickness transition. The results show that the X...

Free-reed organ pipes were introduced at the end of the 18 century and soon became popular across Europe, especially in Germany and Switzerland. As opposed to striking-reed pipes (boundor beating-reed pipes) the reed in free-reed pipes does not beat against the shallot, an orifice in the reed, when it is played. Instead it swings freely through a perforated rectangular plate of brass, like in r...

corrosion of water and gas pipes is not desirable from the view point of health, economy and nuisances. there are many factors in soil which attack the metal pipes for corrosion. (steel, cast, iron and like). that is why the designer of metal pipes for conveyance of metal pipes for conveyance of water and gas should be aware of these factors and pay nutmost care in selection of pipes and protec...

A parametric study on circular thin-walled pipes subjected to pure bending is performed. Both straight and curved pipes are considered. Ratio D/t, initial pipe curvature and internal pressure are the parameters varying in the analyses. The study is mainly FEA-based. It is found that negative curvatures (opposite to bending moment) considerably increase stiffness and buckling limit of the pipe w...