the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

a semi-micromechanical multilaminate model is introduced here to predict the mechanical behavior of soils. this model is like a bridge between micro and macro scale upon the satisfaction of minimum potential energy level during any applied stress/strain increments. the concept of this model is based on a certain number of sampling planes which constitute the elastic-plastic behavior of the soil...

The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

Geometry of eccentrically braced frames (EBFs) in some cases causes the connection of link beam to the column. The details of such conditions should be studied carefully due to the full plastic rotation in the link beam. In this research, the behavior of link-to-column connection is modeled and the failure modes are considered. Based on the previous researches shear link can exhibit better beha...

Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...

Thermo-deformable plastic films experience an optical birefringence phenomenon when they are subjected to mechanical strain, this phenomenon can be described by color fringes behavior observed in sequences of images acquired through photoelasticity assemblies. This paper proposes a temporary morphological analysis that color fringes experience when the plastic film is deformed. For the image an...

A new plastic hinge integration method overcomes the problems with nonobjective response caused by strain-softening behavior in force-based beam–column finite elements. The integration method uses the common concept of a plastic hinge length in a numerically consistent manner. The method, derived from the Gauss–Radau quadrature rule, integrates deformations over specified plastic hinge lengths ...

In this paper,fluidity onset analysis in FG thick-walled spherical tanks under concurrent pressure loading and heat gradient has been presented. Designing thick-walled spherical tanks under pressure as tanks holding fluids under heat loads with high heat gradients require new approaches. Under high internal pressure and high temperature, the tank enters the plastic stage in a part of its thickn...

neither damage mechanics model nor elastoplastic constitutive law can solely describe the behavior of concrete satisfactorily. in fact, they both fail to represent proper unloading slopes during cyclic loading. to overcome the disadvantages of pure plastic models and pure damage approaches, the combined effects need to be considered. in this regard, various classes of plastic-damage models have...

Plastic deformation behavior of Cu/Ni/W metallic multilayers with individual layer thickness ranging from 5 nm to 300 nm is investigated by nanoindentation testing. The experimental results reveal that the composite still exhibits indentation-induced plastic deformation instability and the loss of strain hardening ability at the nanometer scale even if the composite contains two kinds of layer ...