This cross-sectional study was conducted in 1992 in the oldest of three Portland cement producing factories in Eastern Saudi Arabia. The respirable dust level was in excess of the recommended ACGIH level in all sections. Spirometry was done for 149 cement workers and 348 controls, using a Vitalograph spirometer. FEV1, FVC, FEV1/FVC% and FEF25-75% were calculated and corrected to BTPS. A signifi...

This study aims to determine the major elements of Portland cement type I and II (CEMI and CEMII) in a cement factory in north Tunisia and which metal elements are introduced into the production process. We determine also the metal input rate and their distribution at the entrance and exit of the process. The major elements were analyzed and the trace elements (Arsenic, barium, lead, mercur...

INTRODUCTION The purpose of this synthesis of available information was to provide the Texas Department of Transportation (TxDOT) with a concise document on the state of the practice regarding the use of kiln dusts for stabilization of subgrade soils or granular base materials in highway pavements. This document should assist TxDOT in making decisions related to allowing the use of kiln dusts a...

the benefits of using mineral admixtures as a partial replacement of portland cement (pc) are well established in the literature. economic and environmental advantages by reducing co2 emissions are well known. this paper examines the influence of intergrinding and separate grinding on the amount of energy consumption, blaine fineness and particle size distribution (psd) of blended cements, name...

Different wastes are generated in ferromanganese and silicomanganese alloy production. One of them is the ultrafine oxidized dust (UOD) produced in the collection and control of flying dusts in the ferroalloy industry. This waste has fairly high manganese content (20%–40% Mn), making it suitable to be a secondary raw material for the ferromanganese industry. This research proposes a method for ...

The article is devoted to the study of effect lime kiln dust (LKD) on properties concrete mixtures and using Portland cement fly ash. A possible mechanism for formation structure cement–ash paste with addition LKD analyzed in detail. positive hydration (an increase content water by 40.50%) due an alkalinity shown. Using method experiment mathematical planning, experimental–statistical polynomia...

Solidia CementTM is a non-hydraulic cement composed primarily of low-lime containing calcium silicate phases such as wollastonite / pseudowollastonite (CaO·SiO2), and rankinite (3CaO·2SiO2). This contrasts the high-lime alite (3CaO·SiO2), belite (2CaO·SiO2), tricalcium aluminate (3CaO·Al2O3), tetracalcium aluminum ferrite (4CaO·Al2O3·Fe2O3), and gypsum (CaSO4·2H2O) phases that comprise ordinary...