Introduction: In radionuclide imaging, object scatter is one of the major factors leading to image quality degradation. Therefore, the correction of scattered photons might have a great impact on improving the image quality. Regarding this, the present study aimed to determine the main and sub-energy windows for triple energy window (TEW) scatter correction method usin...

A Monte Carlo simulation, based on GEANT4, has been developed to compute the contribution of first-order, second-order, and higher order scattering in a Computed Tomography (CT) system equipped with an industrial 450 kV X-ray tube and an area detector. The validation of simulation against the experimental data showed a good agreement. The amount of scattering produced by several hollow aluminum...

PURPOSE This work aims at assessing, through experimental measurements and Monte Carlo calculations, the scatter to primary ratio (SPR) for the micro-CT subsystem of the FLEX Triumph preclinical PET-CT scanner to improve its quantitative capabilities. METHODS Experimental measurements were carried out using the single blocker method, where five cylindrical blockers with diameters ranging betw...

PURPOSE The proliferation of cone-beam CT (CBCT) has created interest in performance optimization, with x-ray scatter identified among the main limitations to image quality. CBCT often contends with elevated scatter, but the wide variety of imaging geometry in different CBCT configurations suggests that not all configurations are affected to the same extent. Graphics processing unit (GPU) accel...

Length-Based Spawning Potential Ratio (LB-SPR) model was applied to describe the status of Javelin grunter, Pomadasys kaakan in the Persian Gulf and Oman Sea. From April 2002 to March 2019. 45,489 specimens were collected from fish landing sites monthly, and their length (FL) and weight were measured. The results of the present study showed that different gears captured most of the P. kaakan be...

The characterization of the incident photon beam is usually divided into its dependence on collimator setting (head-scatter factor) and off-axis position (primary off-axis ratio). These parameters are normally measured "in air" with a build-up cap thick enough to generate full dose build-up at the depth of dose maximum. In order to prevent any influence from contaminating electrons, it has been...

The primary aim of the present work was to analyze the effects of varying scatter-to-primary ratios on the appearance of simulated nodules in chest tomosynthesis section images. Monte Carlo simulations of the chest tomosynthesis system GE Definium 8000 VolumeRAD (GE Healthcare, Chalfont St. Giles, UK) were used to investigate the variation of scatter-to-primary ratios between different angular ...

An X-ray computed tomography (CT) model based on the GEANT4 Monte Carlo code was developed for simulation of a cone-beam CT system for industrial applications. The full simulation of the X-ray tube, object, and area detector was considered. The model was validated through comparison with experimental measurements of different test objects. There is good agreement between the simulated and measu...