The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...

dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. these walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. in this research intermediate dual system of steel moment frame was chosen with int...

In this work, a stable NiFe2O4 paraffin based ferrofluid was prepared via high energy milling. The rheological properties of ferrofluid were studied. Bingham plastic, HerschelBulkley and Casson models were used to evaluate the shear stress-shear rate dependency. The ferrofluid exhibited a shear thinning behaviour for all studied magnetic field. The magneto-viscous effect and thixotropy of...

Deflection analysis of a simply supported microbeam subjected to a concentrated load at the middle is investigated on the basis of a shear deformable beam theory and non-classical theory. Effects of shear deformation and small size are taken into consideration by hyperbolic shear deformable beam theory and modified strain gradient theory, respectively. The governing differential equations and c...

Lightweight steel framing is a method in housing and construction that have been widely used in lightweight steel construction. In this method, the structure is built by cold formed steel elements. They are cost-effective, light, and easy to assemble. However, the performance of lateral load resisting systems in cold-formed steel structures specially the behavior of cold-formed steel shear wall...

nowdays, production of high quality engine oils is one of the worries of our country’s engine oil industry. in this study, the behavior of four commercial polymers used in nation motor oil industry in obtaining the best viscosity index improver was investigated. in this regard, viscometric behavior, shear stability and polymers’ performance for engine cranking were compared at low temperature. ...

The system of steel shear wall is an initiative resistance system against the lateral load such as an earthquake and the wind that has been researched in the last three decades. Currently, this system is noticed more than other systems because of adequate stiffness, ductility, and more energy absorption. The system of steel shear wall with corrugated sheets has been offered as an innovative sys...

Large-eddy simulation (LES) is used to investigate turbulence in a marginally-unstable stratified shear layer motivated by the observation of deep-cycle turbulence in the upper Equatorial Undercurrents. The initial condition consists of uniform shear and stratification profiles, and a constant gradient Richardson number Rig = 0.25. A constant wind stress forces turbulence in the upper surface l...

We propose a Widom-like scaling ansatz for the critical jamming transition. Our ansatz for the elastic energy shows that the scaling of the energy, compressive strain, shear strain, system size, pressure, shear stress, bulk modulus, and shear modulus are all related to each other via scaling relations, with only three independent scaling exponents. We extract the values of these exponents from ...

Self-assembled lamellar structures composed of block copolymers are simulated by molecular dynamics. The response of a bulk system to external shear is investigated, in particular, the average energy, the entropy production, and the stability of the lamellae's orientation. We distinguish two orientations, a parallel orientation in which the normal to the lamellae sheets lies in the direction of...