Roughness elements or turbulence promoters have been widely used to enhance heat transfer in cooling passages of modern gas turbine blades. Although such ribs substantially enhance heat transfer, the heat transfer coefficient is reduced immediately at corner downstream of each rib, creating hot spots. To remove such hot spots some of the ribs can be detached from the channel walls. In this pape...

The direct numerical simulation (DNS) of heat transfer in a fully developed turbulent pipe flow with for various Prandtle numbers are performed to obtain statistical quantities such as turbulent heat flux, and temperature variance. Main emphasis is placed on Prandtl number effects on turbulent heat transfer in pipe flow. Probability density functions and joint probability density functions of v...

Heat Transfer has special importance in engineering applications. So, researchers have suggested different new idea to increase heat transfer and using nanofluid is one of these methods In recent years, new methods have been used. One of these methods is the use of nanofluids, ., because nanofluids have higher heat transfer potential than base conventional fluids. In this investigation effect o...

the effect of γ-al2o3 nanoparticles on heat transfer rate, baffle spacing and pressure drop in the shell side of small shell and tube heat exchangers was investigated numerically under turbulent regime. γ-al2o3-water nanofluids and pure water were used in the shell side and the tube side of heat exchangers, respectively. since the properties of γ-al2o3-water nanofluids were variable, they were ...

in this paper, turbulent mixed convective heat transfer of water and al2o3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. for the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. the coupling of pressure and veloci...

Convection heat transfer in pulsating turbulent flow with large velocity oscillating amplitudes in a pipe at constant wall temperature is numerically studied. A low-Reynolds-number (LRN) k–e turbulent model is used in the turbulence modeling. The model analysis indicates that Womersley number is a very important parameter in the study of pulsating flow and heat transfer. Flow and heat transfer ...

An experimental study is conducted to determine local heat-transfer performance and mechanisms in radial flow through two parallel heated disks. Three distinct heat-transfer mechanisms are disclosed along the flow passage: steady laminar, periodic laminar, and turbulent. The heat-transfer performance is enhanced proportional to the 0.5 and 0.8 powers of Reynolds number, in the steady periodic a...

force convection heat transfer of turbulent nano fluid flow in 90 and 60 degree elbow is simulated by using fluent. single phase model has been implemented to study such a flow field and standard

The hydrodynamic and thermal lattice Boltzmann methods are applied to investigate the turbulent convective heat transfer in the wavy channel flows. In this study, the turbulent phenomena are modeling by large-eddy simulations with the Smagorinsky model. As a benchmark, the laminar and turbulent backward-facing step flows are simulated first. The results give good agreement with other numerical ...

In this paper, Turbulent mixed convective heat transfer of water and Al2O3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. For the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. The coupling of pressure and veloci...