This paper presents the results of an experimental study on the effect of limestone powder on the compressive strength, tensile behavior, and micromechanical parameters of a highly ductile cement composite incorporating limestone powder. Four mixtures were determined according to the replacement ratio of cement with limestone powder. A series of experiments including compressive strength, uniax...

Due to their widespread availability, sandstones are commonly used as a natural stone for buildings, monuments and sculptures. In thecurrent study, nine sandstone samples from the Upper Red Formation (specified by the letters A, B, C, CG, S, S1, Sh, Tr and Min)were studied from a petrophysical point of view and their durability was evaluated. Then, their suitability as building stones wasassess...

In order to study the application of lime-fly ash loess in permafrost subgrade engineering, uniaxial compressive test, fast direct shearing test and permeability tests were carried out on lime-fly ash loess under different curing ages and freeze-thaw cycles. Uniaxial compressive strength of lime-fly ash loess increases slowly with the curing ages, and can reach 3.5 Mpa after the curing ages of ...

abstract: this paper presents the results of pullout tests on uniaxial geogrid embedded in silica sand under monotonic and cyclic pullout forces. the new testing device as a recently developed automated pullout test device for soil-geogrid strength and deformation behavior investigation is capable of applying load/displacement controlled monotonic/cyclic forces at different rates/frequencies an...

an understanding of the strength of rice grains as affected by moisture content and temperature is important for analysis and prediction of cracking and/or breakage behavior during handling and processing. further, the magnitude of these properties at various moisture contents and temperatures is needed for the accurate design of milling machinery so that grain damage is minimized. to determine...

------------------------------------------------------Abstract---------------------------------------------------------Estimation of strength properties (uniaxial compressive and point load) from physical properties (density, porosity and rebound hardness) of shale rock type from Kogi State, Nigeria was investigated. The shale rock types were sampled and tested for their properties through in-s...

Normal 0 false false false EN-US X-NONE AR-SA The ratio of compression yield strength to the initial tensile yield strength is called Bauschinger effect factor, BEF. A nonlinear strain hardening mathematical model is proposed for 7075 aluminium alloy (A7075). Uniaxial tension-compression experimental data are used to figure out a suitable model to study the BEF. Hence, uniaxial tension-co...

This study analyzed uniaxial compression strength over time by preparing a homogel specimen from a bio grouting material, a cement-like form produced by environment-friendly microbial reactions. Among chemical grouting methods, the most commonly used method is the Labile Waterglass method. In this study, the homogel uniaxial compressive strength of Labile Waterglass (LW) injection material and ...

The present study aims to obtain the tensile properties of early age concrete based on a uniaxial tension test employing RC slender members. First, the paper shows that concrete strain is equal to the strain of rebar at the mid-span of the RC member. The tensile Young's modulus and the strain capacity of early age concrete are estimated using strain measurements. The experiment indicated that t...