Abstract—A large variety of pipe flange is required in marine and construction industry. Pipe flanges are usually welded or screwed to the pipe end and are connected with bolts. This approach is very simple and widely used for a long time; however, it results in high development cost and low productivity, and the productions made by this approach usually have safety problem at the welding area....

A manufacturing process plan was developed for a welded condenser utilizing a sintered wick. Electronic devices have progressed to the point where new designs are limited by the thermal management system used to ensure safe operating temperatures. Coupling the effects of high surface area of multiple condensers, the low thermal resistance of loop heat pipes, and the increased dissipation rates ...

On-line spray water cooling (OSWC) of electric-resistance-welded (ERW) steel pipes can replace the conventional off-line heat treatment process and become an important and critical procedure. The OSWC process improves production efficiency, decreases costs, and enhances the mechanical properties of ERW steel pipe, especially the impact properties of the weld joint. In this paper, an annular OSW...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

In order to achieve integrated condition in the girth welding of high pressure natural gas transmission pipelines, the weld zones and its surrounding area should have good mechanical properties. Residual stresses are an important defect especially in the girth welding of the pipeline. In this study, two API X70 steel pipes (with spiral seam weld) of 56 inches outside diameter and 0.780 inch wal...

In recent years, ExxonMobil has undertaken a comprehensive experimental and numerical program to characterize tensile strain capacity of welded pipelines under different operational, geometric and material property conditions. Key parameters affecting tensile strain capacity have been identified through sensitivity studies and used in a large-scale FEAbased parametric study to develop closed-fo...

Buried pipeline systems are commonly used to transport water, sewage, oil, natural gas and other materials. In the conterminous United States, there are about 77,109 km (47,924 miles) of crude oil pipelines, 85,461 km (53,114 miles) of refined oil pipelines and 67,898 km (42,199 miles) of natural gas pipelines (FEMA, 1991). The total length of water and sewage pipelines is not readily available...

As a part of component integrity test program at Bhabha Atomic Research Centre, fatigue tests on full scale pipe and pipe welds were conducted in addition to CT and TPB specimens. In this paper the outcome of this program is discussed. Specimen testing was conducted to determine the basic cyclic stress strain curve, LCF and FCGR properties. FCGR tests were conducted on CT and TPB specimens to u...