This article presents the results of a study dealing with the utilization of sludge water from a concrete plant as a partial replacement for mixing water in the production of cement composites. The replacement of mixing water with sludge water from a concrete plant was carried out in the amounts of 20% and 50%. The following tests were carried out in order to determine the effect of the replace...

hot or cold weather condition affects the quality of the concrete in different ways, which one of them is increase or decrease in the initial temperature of the concrete. in this study, the impact of the initial temperature of the concrete on its quality in concrete kerbs made by dry pressing method with portland cement is examined. concretes with similar mix designs and initial temperatures of...

Currently, reuse of solid waste from disused infrastructures is an important environmental issue to study. In this research, polymer concrete was developed by mixing orthophthalic unsaturated polyester resin, artificial microfillers (calcium carbonate), and waste aggregates (basalt and limestone) coming from the recycling process of concrete sleepers. The variation of the mechanical and physica...

Various experimental studies have been carried out on glass fiber reinforced concrete (GFRC), but in limited studies, the behavior of this type of concrete is evaluated using finite element method (FEM). In this study an analysis model is presented for predicting energy absorption capacity of glass fiber reinforced self-compacting concrete (GFRCSCC) beams and the results are compared with exper...

Frequent increase in the price of cement and other building materials across Nigeria has reawakened serious need to relate research to production, especially in the use of locally available materials as alternatives for construction of functional but low-cost dwellings in both rural and urban areas in the country. This article aimed at prediction and optimizing compressive strength of concrete ...

Microsilica concrete was prepared with a water-binder ratio of 0.35. Microsilica was used as a 10% replacement of cement by weight. Cylinder and cube specimens were cast for testing different hardened properties of the concrete. Three curing methods such as water curing, wrapped curing, and dry-air curing were applied at 20±2 C to cure the cylinder and cube specimens until the 0 day of testing....

–Flyash based geopolymer concrete is introduced in 1979 by Davidovits to reduce the use of OPC in concrete. Geopolymer is an inorganic alumino-hydroxide polymer synthesized form predominantly silicon and aluminum materials of geological origin and by product materials such as flyash (with low calcium). In this paper an attempt is made to study strength properties of geopolymer concrete using lo...

This paper presents the results of a fundamental study to expand the applicability of the current AASHTO LRFD Bridge Design Specifications for concrete strength up to 18 ksi for reinforced and prestressed concrete members in flexure and compression. A total of 321 specimens were tested to determine the material properties of three high-strength concrete mixtures having target compressive concre...

Reinforced concrete beam; Shear strength; Artificial neural network; Adaptive neuro-fuzzy inference system; Iranian concrete institute code; American concrete institute code. Abstract In this paper, the Artificial Neural Network (ANN) and the Adaptive Neuro-Fuzzy Inference System (ANFIS) are used to predict the shear strength of Reinforced Concrete (RC) beams, and the models are compared with A...

The present Experimental investigation is to study the Mechanical Properties of the Fly ash concrete reinforced with steel fibers. The concrete composite comprises of steel fibers in different percentages and partial replacement of cement in different proportions. Steel fibers varied from 0%, 0.5%, 1% and 1.5% by weight of cement and replacement of fly ash varied from 0%, 10%, 20%, 30% and 40% ...