Gas-to-liquid (GTL) fuel is regarded as a promising alternative diesel fuel. It can be used either directly as a diesel fuel or in blends with petroleum-derived diesel or biodiesel. This study investigated the fuel properties, engine performance and exhaust emissions of B5 diesel, GTL fuel and their blends. The main fuel properties of the blended fuels showed a linear variation with the fractio...

In order to maintain cab comfort truck drivers have to idle their engine to obtain the required power for accessories, such as the air conditioner, heater, television, refrigerator, and lights. This idling of the engine has a major impact on its fuel consumption and exhaust emission. Idling emissions can be as high as 86.4 g/h, 16,500 g/h, 5130 g/h, 4 g/h, and 375 g/h for HC, CO2, CO, PM, and N...

Enzymatic fuel cells produce electrical power by oxidation of renewable energy sources. An enzymatic glucose biofuel cell uses glucose as fuel and enzymes as biocatalyst, to convert biochemical energy into electrical energy. The applications which need low electrical voltages and low currents have much of the interest in developing enzymatic fuel cells. An analytical modelling of an enzymatic f...

Title of dissertation: ESSAYS ON THE ECONOMICS OF AUTOMOBILE FUEL ECONOMY Takahiko Kiso, Doctor of Philosophy, 2013 Dissertation directed by: Professor Kenneth McConnell Department of Agricultural and Resource Economics This dissertation consists of three chapters that analyze issues relating to automobile fuel economy. Chapter 1 discusses automobile fuel economy regulations in the United State...

During a fuel injection cycle pressure inside Combination Electronic Unit Pump (CEUP) fuel injection system varies from low (~50 bars) to very high (~1500 bars) in fractions of seconds depending on the operating conditions. Physical properties of fuel including density, acoustic wave speed and bulk modulus also vary as a function of rapidly varying fuel pressure. A detailed analysis of these ke...

Misfueling of a general aviation aircraft with a Jet Fuel instead of an Avgas can have dire consequences. In this paper simple non-destructive testing method is proposed using two capacitive fuel senders that are vertically displaced in a fuel tank by a small distance to detect such situation. Method is based on different readings for the same fuel level in a tank (as fuel senders are displaced...

Objectives • Develop realistic and internally consistent detailed designs for automotive gasoline fuel processor/ proton exchange membrane (PEM) fuel cell systems and direct hydrogen PEM fuel cell systems by using current-year technology. • Apply Design for Manufacture and Assembly (DFMA) design and costing techniques to compare system designs at low, medium, and high annual production rates. •...

Because of high pressure fluctuations in Combination Electronic Unit Pump (CEUP) system during fuel injection cycles, physical properties of diesel fuel including density, acoustic wave speed and bulk modulus also vary. These physical properties of fuel have significant importance in predicting the fuel injection behavior and its optimization. A 1D viscous damped mathematical model of wave equa...

Temperature, voltage and fuel flow distribution all contribute considerably to fuel cell performance. Conventional methods cannot accurately determine parameter changes inside a fuel cell. This investigation developed flexible and multi-functional micro sensors on a 40 μm-thick stainless steel foil substrate by using micro-electro-mechanical systems (MEMS) and embedded them in a proton exchange...

Fuel cells are being considered increasingly as a viable alternative energy source for automobiles because of their clean and efficient power generation. Numerous technological concepts have been developed and compared in terms of safety, robust operation, fuel economy, and vehicle performance. However, several issues still exist and must be addressed to improve the viability of this emerging t...