The direct ZnAl layered double hydroxide growth on AA2024 is a fast-occurring reaction, yet characterized by an inhomogeneous film thickness. It has been shown that at the periphery of Cu-rich intermetallic, flakes tend to be larger and denser. A combination in situ ex measurements were used monitor changes grown regions intermetallics. Immediately after immersion, activation intermetallic phas...

Lead-free selective soldering can result in extended times at high temperatures, which in turn can result in excessive dissolution of exposed copper, such as plated through holes. This phenomenon is more severe with lead-free, since the alloys have higher melting points, hence requiring longer times for the PTH to reach the higher temperatures, and the alloys typically have a greater capacity t...

Both Zirconium-based alloys and 321stainless steel are widely used as engineering alloys due to their good mechanical properties. Conventional fusion welding techniques for Zr alloys and stainless steel are not feasible due to the formation of brittle intermetallic compounds such as (Zr3Fe, ZrFe2 and Zr2Fe) and corrosion cracking. Brazing is one of the most wide...

In the present study, the effect of post-rolling annealing heat treatment on the formation of intermetallic compounds between Al-Cu strips, in the presence of nickel coating on the Cu strips, was investigated. In addition, the effect of post-rolling annealing and intermetallic compounds on the bond strength of Al-Cu strips was evaluated. In order to prepare samples, Cu strips were coated with n...

SnAgCu is one of the most promising candidates for lead-free solders to replace conventional eutectic SnPb solders. The effects of solder volume on interfacial reactions and microstructure evolution in Au/Ni-SnAgCu-Ni(P) solder joints have been investigated under soldering and thermal aging conditions. The results show that solder volume has a strong effect on the formation of Au-containing int...

Abstract: titanium sheets in pure molten aluminum at 750 and X-Ray Diffraction Analysis results, TiAlintermetallic layer thickness increases slowly at primary stages. After that an enhanced growth rate occurs due to layercracking and disruption. Presumably, reaction starts with solving titanium into the molten aluminum causing intitanium super saturation and TiAlintermetallic layer which conseq...

Duplex stainless steels (DSS) constitute both ferrite and austenite as a matrix. Such a microstructure confers a high corrosion resistance with favorable mechanical properties. However, intermetallic phases such as sigma (σ) and chi (χ) can also form during casting or high-temperature processing and can degrade the properties of the DSS. This research was initiated to develop time-temperature-t...