Aluminium base alloy (Al-Cu-Si) was reinforced with silicon carbide (SiC) particles, in various percentage compositions from 0-20 wt%. Silicon carbide particle size of 20µm was selected. The molten slurry of SiC reinforced base aluminium metal was casted through green and dry sand casting methods and solidification process was carried out under ambient conditions. A selected population...

we report the growth and characterization of cu nanoparticles thin film of on glass substrate by pulse laser deposition method. the cu thin film prepared with different energy 50, 60, 70, and 80 mj. the energy effect on the morphological, structural and optical properties were studied by afm, xrd and uv-visible spectrophotometer. surface topography studied by atomic force microscopy revealed na...

    Given the need to increase the efficiency of heat transfer in thermal systems, especially systems using nanofluids in microscale and nanoscale heat transfer equipment ideas to improve their performance is very good.In present study, the flow and heat transfer of Water-Cu nanofluid in micro-tube with slip regime with constant wall heat flux numerically simulated with low Reynolds numbers. Sl...

New two nano- sized Schiff base complexes [M(L)], where L= 2, 2'-((1E, 1E')-(1, 2 phenylen bis (azanylylidene)) bis (methanylylidene)) bis (4-bromo phenolato) and M=Cu or Zn, (a, b complexes) were synthesized by ultrasonic irradiation. These complexes were characterized by elemental analysis, molar conductivity, FT-IR, fluorescence emission, 1H NMR, field emission scanning electron spectroscopy...

In this research nanoparticles of Ni0.55Zn0.35Cu0.1Fe2O4 were synthesized by sol–gel auto-combustion method. Changes in phase constituents, microstructure and magnetic properties as a result of Zn and Cu additions were evaluated by X-ray diffraction (XRD), Field Emission Scanning Electron Microscope (FESEM), and Vibration Sample Magnetometer (VSM) techniques. XRD results show that the doped sam...

Non-conductive film with Zn nano-particles (Zn-NCF) is an effective solution for fine-pitch Cu-pillar/Sn– Ag bump interconnection in terms of manufacturing process and interfacial reliability. In this study, NCFs with Zn nano-particles of different acidity, viscosity, and curing speed were formulated and diffused Zn contents in the Cu pillar/Sn–Ag bumps were measured after 3D TSV chip-stack bon...

here we present our experimental results in synthesizing au-cu nano-particles with tunable localized surface plasmon resonance frequency through wet-chemical at temperature room. the reaction is performed in the presence of ascorbic acid as a reducing agent and polyvinyl pyrrolidone as capping agent via four different procedures: (1) mixture of 90% haucl4 and 10% cuso4.5h2o precursors, (2) mixt...

Copper smelting slags are hard materials. Therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. Copper smelting slags in the Bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. With this gri...

Due to increasing demands on wood, recovered wood is becoming more and more important. It is mainly used for energetic purposes and for particle board production. This material was polluted with various chemicals (surface coatings, biocides, concrete residues, etc.) during service life. These chemicals causes difficulties at the end of service life. In order to elucidate presence of inorganic p...

The levels of trace elements and polycyclic aromatic hydrocarbons (PAHs) in fly ash generated by coal combustion have received considerable attention in recent years, due to their potential environmental impact. Sixteen high priority PAHs and 14 trace elements in coal fly ash were measured. The particle sizes of fly ash showed a bimodal distribution, and most ash particles were within a range o...