A buckling solution and a non-linear post buckling solution were employed for the wrinkling analysis of a tensioned Kapton square membrane. The buckling solution with significantly reduced bending stiffness creates localized buckling modes accounting for the wrinkle formation in the membrane. The non-linear post buckling solution with an updated Lagrangian scheme describes the detailed wrinkle ...

Integrating deformable interconnects with inorganic functional materials establishes a path to high-performance stretchable electronics. A number of applications demand that these systems sustain large deformations under repetitive loading. In this manuscript, the influence of the elastomeric substrate on the stretchability of serpentine interconnects is investigated theoretically and experimen...

Steel plate shear walls (SPSWs) in buildings are known to be an effective means for resisting lateral forces. By using un-stiffened walls and allowing them to buckle, their energy absorption capacity will increase significantly due to the postbuckling capacity. The post-buckling tension field action of SPSWs can provide substantial strength, stiffness and ductility. This paper presents the Fini...

This paper investigates the buckling behavior of piezoelectric nanowires under distributed transverse loading, within the framework of the Timoshenko beam theory, and in the presence of surface effects. Analytical relations are given for the critical force of axial buckling of nanowires by accounting for the effects of surface elasticity, residual surface tension, and transverse shear deformati...

Finite element (FE) simulation with inherent deformation is an ideal and practical computational approach for predicting welding stress and distortion in the production of complex aluminum alloy structures. In this study, based on the thermal elasto-plastic analysis, FE models of multi-pass butt welds and T-type fillet welds were investigated to obtain the inherent strain distribution in a 5A06...

Time-dependent buckling phenomena of polysilicon micro beams have been demonstrated and reported. These beams are suspended 2 mm above the silicon substrate with dimensions of 100 mm (length) × 2 mm (width) × 2 mm (thickness). When a constant input current is supplied at or above a threshold value, electro-thermally induced buckling occurs. It is observed and recorded that the beams exhibit tim...

Thermal buckling response of functionally graded plates is presented in this paper using sinusoidal shear deformation plate theory (SPT). The material properties of the plate are assumed to vary according to a power law form in the thickness direction. Equilibrium and stability equations are derived based on the SPT. The non-linear governing equations are solved for plates subjected to simply s...

This paper investigates symmetrical buckling of orthotropic circular and annular plates of continuous variable thickness. Uniform compression loading is applied at the plate outer boundary. Thickness varies linearly along radial direction. Inner edge is free, while outer edge has different boundary conditions: clamped, simply and elastically restraint against rotation. The optimized RayLeigh-Ri...

 This paper is concerned with numerical simulation of plastic modes of tubular structures. The simulation incorporates with finite element limit analysis based on the upper bound method and the minimization technique. The analysis considers sequential deformation of structures with work-hardening effects. The simulation results demonstrate plastic buckling is one of the collapse modes and occu...

This paper presents a hyper elastic finite element-based lattice access for the illustration of post-buckling reaction in single wall carbon nanotubes (SWCNTs). A one-term incompressible Ogden-type hyper elastic model is taken in under axial compression to describe mechanical response of SWCNTs. Numerical experiments are transferred and the results are juxtapose to finite atomistic simulations,...