Carbon fiber composites have become popular in aerospace applications because of their lightweight yet strong material properties. The injection molding process can be used to produce discontinuous fiber composites using less time and resources than traditional methods, thereby broadening carbon fiber composites’ applications in different industries. Utilization of longer fibers offers more loa...

In this paper we present a constitutive relation for predicting the rheology of short glass fibers suspended in a polymeric matrix. The performance of the model is assessed through its ability to predict the steady-state and transient shear rheology as well as qualitatively predict the fiber orientation distribution of a short glass fiber (0.5 mm, L/D < 30) filled polypropylene. In this approac...

In this work, the simulation results from a program developed for the three-dimensional analysis of compression molding of thermoset composites were compared to the experimental results of an actual molded thermoset sample. The program predicts the flow pattern, fiber orientation, fiber length distribution, curing of the resin and mechanical properties. The comparison between simulation and exp...

The probability distribution of the differential group delay (DGD) at any fiber length is determined by use of a physically reasonable model of the fiber birefringence. We show that if the fiber correlation length is of the same order as or larger than the beat length, the DGD distribution approaches a Maxwellian in roughly 30 fiber correlation lengths, corresponding to a couple of kilometers i...

t h r o u g h SEM and SAM Measurement of the fiber orientation is one of the most important inspection items 2.1 Orientation of the Molding Cross to examine the shape and strength of the Section through SEM products[ll. The 3D fiber orientation has been measured by analyzing the elliptical marks of the cross section of the fiber from the photograph of the FRP. In these methods, i t is not possi...

In this paper, the post-cracking tensile behavior of Ultra-High Performance Cementitious Composites (UHPCC) was studied and an improved analytical model to predict the behavior depending on the fiber orientation distribution was proposed. Two different casting methods were adopted to estimate the influence of the casting method on the tensile behavior. The direct tensile test results showed tha...

In the current study the effect of nanoclay content and carbon fiber orientation on the buckling properties of epoxy/nanoclay/ carbon fiber orientation is investigated. Buckling samples were prepared with 1, 3 and 5 wt% of nanoclay and 0, 30 and 45 degrees of fiber orientations based on VARTM technique. The results obtained from the buckling tests showed that adding 1wt% of nanoclay into the pu...