The aim of this paper is to enhance thermal performance of a microchannel heat sink by using nanoencapsulated phase change material (NEPCM) slurry as a cooling fluid instead of pure fluid. A threedimensional model of a circular channel using water slurry of NEPCM was developed. The results show a significant reduction in the mean fluid temperature along the channel and heat sink wall temperatu...

In the design of heat exchangers, it is necessary to determine the heat transfer rate between hot and cold fluids in order to calculate the overall heat transfer coefficient and the heat exchanger efficiency. Heat transfer rate can be determined by inverse methods. In this study, the unknown space-time dependent heat flux imposed on the wall of a heat exchanger internal tube is estimated by app...

In this paper, a modified two-fluid model has been adopted to simulate the process of upward vertical subcooled flow boiling of refrigerant R-113 in a vertical annular channel at low pressure. The modified model considers temperature dependent properties and saturation temperature variation and was validated against a number of published low-pressure subcooled boiling experiments. The results s...

Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...

metric (mapping evapotranspiration at high resolution with internalized calibration) is known as an appropriate surface energy balance model for the estimation of the spatial distribution of evapotranspiration (et) in semi-arid regions. based on lysimeter measurements, metric has shown et estimates of 10% on a sub-field scale on a daily basis. there is a need to identify how the model is sensit...

laser forming is a modern process which is mainly used for forming metals. different lasers are used in this regard that includes nd: yag and co2. in this study, forming bi-layer sheets of aluminum/ceramic by laser was investigated. furthermore, effect of uniform and gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. fem simulation ind...

Mold powders are fluxing agents used as raw materials in the steel industry, which play very important role in processing stability and final surface quality of a product. Surface quality depends particularly on the viscosity and the heat transfer of infiltrated mold flux between the mold wall and the solidified steel shell. Heat flux across the interfacial gap depends on thermal properties of ...

in this paper an indirect method is presented to detect potential geothermal sites in kerman province, southeast iran. geothermal heat flux is one of the main parameters to be investigated in geothermal exploration programs. however, few direct heat flux measurements are available for iran. given the proved relation between curie depths and heat flux, magnetic data can be used to calculate the ...

In this study, the behavior of nanoparticles using a numerical model is discussed. For this study a model for the expansion in free convection heat transfer and mix in a rectangular container with dimensions of 1 × 4 cm using Nano-aerosols in the air is going when copper nanoparticles, use and by changing the temperature difference between hot and cold wall, we will examine its impact on the ra...