نتایج جستجو برای: injection pressure
تعداد نتایج: 553887 فیلتر نتایج به سال:
Experiments were conducted to evaluate the performance of a low heat rejection (LHR) diesel engine. Performance parameters and emission levels were determined at various magnitudes of brake mean effective pressure. Combustion characteristics of the engine were measured with TDC (top dead centre) encoder, pressure transducer, console and special pressure-crank angle software package at peak load...
with developing of optical technologies, using of different imaging methods to study various properties of gasoline direct injection spray is under development. Scope of this article is to study the effect of overall spray angle and spray projected area for determination of spray propagation and investigate the effectiveness of this criterion. The injector was a multi-hole direct injection in...
a numerical model is developed to simulate the transport phenomena in the flow channel between parallel plates with porous and non-porous (or impermeable) walls. the continuity and momentum equations were solved first, assuming the wall reynolds number in the range of with the suction or injection of air at a speed equal to the uniform inlet velocity. the results show that at constant inlet and...
designing and manufacturing the multiple jets simulator and experimental investigation of the multiple jets in crossflow at low velocity ratios have been studied together with design and build a low-speed wind tunnel. a specific rake is used to determine the flow field pressure and changes in static pressure measured by pressure taps in the near field of the jets. there are generally three regi...
Low pressure injection molding (LPIM) method in this paper is investigated as a method of forming alumina parts. This is one of the methods of making engineering ceramics with complex shapes and high dimensional accuracy. In this method, a binder system (paraffin wax + carnuba wax) was used as a plastic agent for easy formation of alumina particles. Different parameters such as feedstock temper...
Recently, there have been problems with particulate matter pollution in diesel engines and it has reduced production rate of these engines and also, it has accelerated the development of new technologies for PFI and GDI gasoline engines. The spray characteristics has significant impact on the combustion efficiency, power and emissions on internal combustion engines. In This study, effect of inj...
This study experimentally investigates the effect of processing parameters on mechanical properties of injection molded copolymer. This paper presents an experimental study on the effects of processing parameters including melt temperature, injection pressure and amount preliminary materials on tensile strength of injection molded copolymer PP-WGRT. Polypropylene (PP - supplied by T.P.C of Iran...
Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید