The goal of this study was improvement of sandy soil using a combination of polystyrene foam container waste and Portland cement. For this purpose, Babolsar sand was used as the base soil. Strips of disposable polystyrene foam container waste in “chips” of 50 ´ 5 mm and 50 ´ 10 mm were added to the soil at 0.0%, 0.1%, 0.2% and 0.3% by weight along with 3% Portland cement at a relative density o...

Nowadays, soil reinforcement using polymer elements have been investigated by a number of researchers in order to increase the load capacity of soils. Reinforcing soils using fibers is a method of soil improvement, which offers a homogenous mixture in combination with soils, regarding their tensile strength. This combination maintains pressure loading capacity and properties in mutual resistant...

geotechnical investigations of waste fills are rarely undertaken, and consequently the geotechnical community has little knowledge of their engineering properties. in this study, a geotechnical testing program was conducted to evaluate the engineering properties of old municipal solid waste sampled in whamyung msw landfill site, busan, korea. the conducted tests included water content, specific...

The effect of particle size on shear strength of granular materials are investigated using direct shear tests. Small direct shear test (60 mm by 60 mm by 24 mm deep) were conducted for particles passing the sieves with opening size of 2.36 mm. Meanwhile, particles passing the standard 20 mm sieves were tested using large direct shear test (300 mm by 300 mm by 200 mm deep). The large direct shea...

The simulation of large-strain geotechnical laboratory tests with conventional Lagrangian finite element method (FEM) techniques is often problematic due to excessive mesh distortion. multiple reversal direct shear (MRDS) test can be used measure the residual strength soils in a setting. However, modelling and generally require advanced numerical methods accommodate large strains concentrated p...

Abstract The paper deals with an analysis of the shear strength behaviour coarse-grained materials using large-sized direct apparatus. curve compacted material allows for determining three typical strengths, i.e. a maximum density sample tested (shear at point A), peak P), and critical achieved large horizontal movement C). Professional laboratories usually apply two different methods. first me...

geotechnical investigations of waste fills are rarely undertaken, and consequently the geotechnical community has little knowledge of their engineering properties. in this study, a geotechnical testing program was conducted to evaluate the engineering properties of old municipal solid waste sampled in whamyung msw landfill site, busan, korea. the conducted tests included water content, specific...

large size direct shear tests (i.e.300 x 300mm) were conducted to investigate the interaction between clay reinforced with geogrids embedded in thin layers of sand. test results for the clay, sand, clay-sand, clay-geogrid, sandgeogrid and clay-sand-geogrid are discussed. thin layers of sand including 4, 6, 8, 10, 12 and 14mm were used to increase the interaction between the clay and the geogrid...

the mechanical behaviour of rockfill materials and aggregates depends not only on particle size and compaction, but also on their strength and lithological properties. in this research two types of large triaxial and direct shear tests are performed on rockfill materials. this paper compares the stress-strain behaviour of sandstone and andesibasalt materials in triaxial compression tests (3006...