Wood pyrolysis oil consists of hundreds of complex compounds, many of which are phenolic-based and exhibit hydrophobic properties. Southern yellow pine was impregnated with a pyrolysis oil-based penetrant using both a high pressure and vacuum impregnation systems, with no significant differences in retention levels. Penetrant concentrations ranging from 5-50% pyrolysis oil/methanol on a volume ...

Isomer distribution patterns of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and naphthalenes (PCNs) were investigated in microwave-assisted pyrolysis (MAP) products of woody biomass. The feedstocks included bark and impregnated wood. The results indicated that isomer distributions in MAP are more selective compared to those reported from wood burning and waste incineration....

Waste to energy is an answer to the growing demand for fossil fuels. Pyrolysis plays an important role in waste to energy technologies. The product obtained from pyrolysis depends on various physical parameters that influence the reaction mechanism. Pyrolysis reactions can be classified onto flash, fast and slow pyrolysis depending on temperature and heating rate. This paper discusses the effec...

fast pyrolysis is an attractive technology for biomass conversion, from which bio-oil is the preferred product with a great potential for use in industry and transport. corn wastes (cob and stover) and eucalyptus wood are widely being produced throughout the world. in this study, fast pyrolysis of these two materials were examined under the temperature of 500 °c; career gas flow rate of 660 l h...

This study was an attempt to produce bio-oil from empty fruit bunches (EFB) of oil palm waste using fast pyrolysis technology. A 150 g/h fluidised bed bench scale fast pyrolysis unit operating at atmospheric pressure was used to obtain the pyrolysis liquid. A comparison of the elemental composition of unwashed and washed feedstock was made in this study. With the five methods of treatment being...

Pyrolysis-gas chromatography-mass spectrometry was performed on milled wood lignins (MWLs) and wood samples. Among the major pyrolysis products identified from loblolly pine lignin were guaiacol, 4-methylguaiacol, 4-vinylguaiacol, vanillin, coniferal­ dehyde, and coniferyl alcohol. White oak lignin pyrolysis products also included guaiacol, 4-methylguaiacol, and vanillin and addi­ tionally 2,6-...

Thermal behavior of plastic materials can be improved by knowing thermal degradation kinetics for the optimal design and operation of pyrolysis process. In the present study, thermogravimetric analysis has been used for the non-isothermal kinetic study of waste high-density polyethylene pyrolysis under nitrogen atmosphere at different heating rates 10, 20 and 40 °C/min. The kinetic parameters, ...

active carbon is char derived from pyrolysis of organic materials. it has a high porosity level and is used to filter fluids. many types of agricultural materials are used to produce active carbon. the trunk of the date palm, with its low density and high porosity, has great potential for producing active carbon. in this research, the bark was pyrolyzed at 450°c for 60 min to produce active car...

In this study, a large number of wood samples from several species of Eucalyptus, including E. grandis, E. urophylla, E. globulus, E. dunnii, E. camaldulensis and their crossing were characterized by pyrolysis-GC/MS method. All the measurements were done directly from the Eucalypus wood samples. S/G ratios were calculated for all guaiacyl and syringyl lignin pyrolysis derivatives. The results w...