Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

This paper presents the Optimization of Non-Traditional Machining (NTM) process for the Electrochemical Machining Process by Particle Swarm Optimization Technique. The main aim of the work is to find the optimum values of machining parameters. The NonTraditional or Unconventional Machining Process has proved to be better than conventional machining process to a large extent. Keywords—Convention...

Electrical discharge machining process is one of the most Applicable methods in Non-traditional machining for Machining chip in Conduct electricity Piece that reaching to the Pieces that have good quality and high rate of machining chip is very important. Due to the rapid and widespread use of alloy DIN1.2080 in different industry such as Molding, lathe tools, reamer, broaching, cutting guillot...

Intelligent knowledge based system (IKBS) is developed for optimizing dry CNC turning process using Taguchi method, CNC Machine, EN19 steel as the work piece material, andCutting Insert. Tool wear and spindle loading which are the machining parameters, spindle speed, feed rate, and depth of cut, areoptimized through the intelligent knowledge based system (IKBS). The experimental CNC turning mac...

The operating control parameters of injection flushing type of electrical discharge machining process on stainless steel 304 workpiece with copper tools are being optimized according to its individual machining characteristic i.e. material removal rate (MRR). Lower MRR during EDM machining process may decrease its’ machining productivity. Hence, the quality characteristic for MRR is set to high...

Wire-cut electric discharge machining is a nontraditional technique by which the required profile is acquired using sparks energy. Concerning wire-cut electric discharge machining, high cutting rates and precision machining is necessary to improve productivity and achieve high quality of machined workpieces. In this research work, an experimental investigation was introduced to achieve higher p...

In this paper, wire electrical discharge machining of D3 tool steel is studied. Influence of pulse-on time, pulse-off time, peak current and wire speed are investigated for MRR, dimensional deviation, gap current and machining time, during intricate machining of D3 tool steel. Taguchi method is used for single characteristics optimization and to optimize all four process parameters simultaneous...

INTRODUCTION Optimization of machining parameters is essential for improving expected outcome of any machining operation. CASE DESCRIPTION The aim of this work is to find out optimum values of machining parameters to achieve minimal surface roughness during milling operation of GFRP. DISCUSSION AND EVALUATION In this machining operation speed, depth of cut and feed rate are considered as pa...

Received: 20 October 2014 / Accepted: 15 November 2014 Abstract: An approach for determination of the best cutting parameters leading to maximum material removal rate in machining D2 (Die Steel) on vertical milling centre is used. The Response Surface Methodology technique is applied to obtain optimum values of considered parameters in machining D2 (Die Steel) with four flutes carbide end mill ...

Optimization of cutting parameters is valuable in terms of providing high precision and efficient machining. One of the effects of cutting force in the end milling operation with low diameter tool (during metal cutting) is tool deflection. Assuming that machining errors mostly arise from tool deflection, attempt was made to optimize machining parameters using Genetic Algorithm (GA) so as to min...