Due to thermomechanical hysteresis in solids undergoing martensitic type of structure transformations the macroscopic strain and volume fraction of martensite are not a single-valued function of stress and temperature, but they become functions of the process of their change. Some of the phenomenological approaches describing ma~n thermomechanical properties of shape-memory alloys (SMA) connect...

this study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a trip steel with a high content of al and a low content of si. to the aim, appropriate treatments were used to produce the starting material (trip steel). the microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...

This paper describes an experimental study of stress-induced martensitic phase transformation in the SMA Nickel-Titanium. The rich local thermo-mechanical interactions that underlie transformation are examined using three-dimensional Digital Image Correlation (strain fields) and infrared imaging (thermal fields). We quantify the complex local interactions between released/absorbed latent heat a...

This study was conducted in order to investigate the influence of plastic deformation on the transformation of retained austenite in a TRIP steel with a high content of Al and a low content of Si. To the aim, appropriate treatments were used to produce the starting material (TRIP steel). The microstructure of the obtained steel was composed of bainite and phases including ferrite and retained a...

Maraging steels gain many of their beneficial properties from heat treatments which induce the precipitation of intermetallic compounds. We consider here a two-stage heat-treatment, first involving austenitisation, followed by quenching to produce martensite and then an ageing treatment at a lower temperature to precipitation harden the martensite of a maraging steel. It is shown that with a su...

Recently, with the requirement of lighter weight and more safety for a design of automobile, energy absorption capability of structural materials has become important. TRIP (Transformation-induced Plasticity) steel is expected to apply to safety members because of excellent energy absorption capability and ductility. Past studies proved that such excellent characteristics in TRIP steel are domi...

AISI 301 stainless steel is a frequently used metal, especially in high temperature demands and or in part with high corrosion risk. Thin spring steel plates can be used as expansions of heat furnaces insulation and variety of all other springs. The present study has assessed the effects of temperature and thermal treatment time span on the microstructure of stainless steel 301 to achieve elast...

Two different dual phase steels were prepared from low carbon manganese steel after the elimination of the banding using the direct quenching (DQ) and the step quenching (SQ) procedures. Different heat treatments resulted in different martensite morphologies, microstructures and mechanical properties. The heat treatments were designed in such a way to obtain a 0.25 volume fraction of martensite...

the microstructure of dual phase steels can be considered as a matrix of ferrite phase reinforced by martensite particles. recent measurements show that the mechanical properties of the ferrite phase are changed with the distance from the martensite grains. in this paper, a new method has been proposed to consider this phenomenon in finite element modeling of dual phase steels microstructure. i...

The Fe-Cr-Ni stainless steels are well known for their ductile behaviour at cryogenic temperatures. This implies development and evolution of plastic strain fields in the stainless steel components subjected to thermo-mechanical loads at low temperatures. The evolution of plastic strain fields is usually associated with two phenomena: ductile damage and strain induced martensitic transformation...