Electroplated nickel coating on cemented carbide is a potential pretreatment technique for providing an interlayer prior to diamond deposition on the hard metal substrate. The electroplated nickel coating is expected to be of high quality, for example, indicated by having adequate thickness and uniformity. Electroplating parameters should be set accordingly for this purpose. In this study, the ...

M. Badida, M. Gombár, L. Sobotová, J. Kmec, Faculty of Mechanical Engineering, Technical University of Košice, Slovakia Increasing of technical level and reliability of machine products in compliance with the economical and ecological terms belongs to the main trends of the industrial development. During the utilisation of these products there arise their each other contacts and the interaction...

he wide use of nickel coatings is T due to their valuable properties.l-2 Nickel coatings are used primarily for decorative and industrial purposes. The uses of nickel in the decorative field are. numerous including automobile parts, fumiture, general hardware and fasteners, bicycles, as undercoats in low-cost jewelry, sporting equipment, toys, cutlery, lamps and plumbing fixtures. Most of the d...

The Ni-B-P alloy coatings were made autocatalytically (electroless) using an alkaline plating bath with nickel chloride hexahydrate (NiCl2.6H2O) as the source of nickel ions, sodium borohydride (NaBH4) and sodium hypophosphite (NaH2PO2) as reducing agents and source of boron and phosphorous ions, respectively. The effects of bath concentrations on the plating rate, composition of coating, surfa...

Cathodic activation examined with reference to the cold fuslon developments (controversy). Historically cathodic activation has been used for plating preparation of p a s s i v e (o x i d e) s u r f a c e s e.g. nickel/chromium alloys, niobium and powdered metals. More recent results of work employing cathodic activation for preparing aluminum for plating will be presented e.g. process paramete...

In the last years efforts were made to overcome the widespread screen printing metallization technique to reduce shading of the front side, increase the finger conductivity, and improve the contact properties of the metallization of crystalline silicon solar cells. A promising approach is plating via wet chemical metal deposition. Hereby, the metals nickel as contact layer and copper or silver ...

A column of alumina modified with sodium dodecyl sulfate (SDS) and dimethylglyoxime (DMG) was prepared for the preconcentration of trace nickel from water samples for flame atomic absorption spectrometry (FAAS) determinations. Under optimized conditions (pH=7.0; flow rate: 20 mlmin-1) nickel was retained on the column. The nickel collected on the column was eluted with 5 mL of 1 M nitric ac...