In this paper, rod drawing process of strain-hardening materials is investigated by analytical, numerical and experimental methods. The classic upper bound solution, based on the assumption of perfect plasticity, has been extended to consider the work-hardening of the material during the drawing process. For a given process conditions and mechanical properties of the rod material, the power ter...

The present work analyses different parameters of pressure die casting to minimize the casting defects. Pressure diecasting is usually applied for casting of aluminium alloys. Good surface finish with required tolerances and dimensional accuracy can be achieved by optimization of controllable process parameters such as solidification time, molten temperature, filling time, injection pressure an...

For specified program behavior and clocking overhead, there is an optimum cycle time. This can be improved somewhat by using wave pipelining, but program unpredictability ultimately limits performance by restricting both cycle time and instruction level parallelism. Algorithm and application implementation should be based on understanding of program behavior, CAD tools, and technology. System o...

Since tubes have numerous industrial applications, different attempts are focused on the Severe Plastic Deformation (SPD) processes of tubes. As an illustration, Tube Channel Pressing (TCP) is an attractive process for this purpose since it can be used for processing of different sizes of tubes. However, more attempts are needed to improve the outcomes of TCP. For example, imposing of greater s...

in forging design the significant parameters are maximum load or energy which are required for the selection of forging press or hammer. these two parameters are varied by the other paramelers such as the geometry of die cavity, flash dimensions, shape of the work piece, friction, mechanical properties of the metal to be forged, temperature, strain rate, and number of the forging operation. the...

Three important parameters in designing a closed die for forging process are ratio of width to flash thickness, ratio of  height to billet diameter and the friction factor. In this paper the influences of these parameters on the required force for the forging and percentage of die filling were investigated. It was found that by controlling the flash dimension, the material loss is reduced and t...

Since tubes have numerous industrial applications, different attempts are focused on the severe plastic deformation processes of tubes. As an illustration, tube channel pressing (TCP) is an attractive process for this purpose since it can be used for processing of different sizes of tubes. However, more attempts are needed to improve the outcomes of TCP. For example, imposing of a greater strai...