Reshaping process is a widely used method for producing tubes with non-circular cross sections. Owing to the friction between pipe and rolls, initial round pipe moves forward and consequently, it gradually formed into square or rectangular one. In practice, geometric profile of the rolls will be changed after a while. These changes would be detrimental the production of faultless products. Ther...

In order to achieve the best performance of a thermal system, two major analyses must be carried out on system: energy and entropy generation. The scenario is mechanism in which system has minimum generation highest Nu number. this regard, we investigated number fluid flow through tubes various cross-sections, namely circular tubes, square channels, rectangular ducts. Additionally, addition nan...

In this paper, convection heat transfer of Al2O3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. For each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. The governing equations in...

This paper presents experimental research on structural behaviour of normal and recycled aggregate concrete filled steel tube (RACFT) columns externally strengthened with carbon fibre reinforced polymer (CFRP) sheets and subjected to axial loading. A total of 22 specimens were tested to investigate the influence of the following variables: (1) tube configurations, circular or square, solid or h...

there have been some experimental tests on hollow curved-steel struts with thin-walled square sections, in order to investigate their general behavior, particularly their capacity for bearing differing loads. one set of square tubes are cold-formed into segments of circular arcs with curvature radii, equal to 4000 mm. different lengths of curved struts are fabricated so as to cover a practical ...

In this paper, considering symmetric collapse mode for hybrid tubes, and using Tsai-Hill fracture criterion to take into account the off-axis strength of an orthotropic lamina, an analytical model is extended and an expression is derived for mean crushing load and fold lengths of circular hybrid tubes. In this model, the influences of the geometrical dimensions including diameter, thickness of ...

Bridge grafting (15 mm) into the sciatic nerve of SD rats was carried out using tendon chitosan tubes having either a circular or triangular cross-section, as well as triangular tubes combined with laminin, CDPGYIGSR, or CSRARKQAASIKVAVSAD (n = 15 in each group). As a control, isografting (15 mm) was carried out in the SD rats (n = 7). Specimens were taken after 1, 2, 4, 6, and 8 weeks for hist...

Abstract This paper experimentally and numerically investigated the impact test response characteristics of circular honeycomb cores. The experiments were conducted on two different structures aluminum-tube core, square structure star structure. specimens tested in order to find energy absorption, specific crashworthiness behaviors. results revealed that cores with could resist higher load than...