Controlled rocking of steel braced frames has been proposed for the seismic retrofit of structures. The controlled rocking approach allows a frame to uplift from its support at the base-of-column to foundation interface while displacementbased steel yielding devices are implemented at the base location to control the response. Past studies have focused on analytical investigations of the respon...

Shake table testing of a 1/5 scale model of a slender bridge steel truss pier that uses a controlled rocking approach as a means of seismic protection was conducted. The controlled rocking approach allows the pier to uplift from its base while passive energy dissipation devices steel yielding devices or fluid viscous dampers are implemented across the uplifting location to control the response....

The welding heat input has a great influence on the weldments properties. This paper describes the influence of welding heat input on the weld metal toughness of high-carbon steel surface welded joint. The steel is surfaced with self-shielded wire, with three different heat inputs (6.5; 10.5 and 16 kJ/cm). Total impact energy, as well as crack initiation and crack propagation energies, are esti...

Controlled rocking of steel braced frames has been proposed for the seismic retrofit of structures. The controlled rocking approach allows a frame to uplift from its support at the base-of-column to foundation interface while displacement-based steel yielding devices are implemented at the base location to control the response. Past studies have focused on analytical investigations of the respo...

This investigation is concerned to evaluate the influence of heat treatment on mechanical behavior of AISI1040 steel; it is one of the grades of medium carbon steel of American standard containing 0.40% carbon in its composition. Specimen of quenched/hardened AISI1040 steel was tempered at temperature (650,450&250°C) for 60, 90&120 minutes to modify desired properties. The mechanical behavior, ...

The aim of the present study was to utilize a strain gauge, which enabled the force applied to produce firmly attached crimpable hooks to rectangular stainless steel arch wires, to be measured. In vitro testing of two hooks, American Orthodontic (AO) and TP Orthodontic (TP), and two dimensions of stainless steel archwire, 0.019 x 0.025 and 0.018 x 0.025-inch, was carried out using an Instron Un...

Z. Burzić, Military Technical Institute, Belgrade, Serbia. Dž. Gačo, F. Islamović, E. Bajramović, Technical faculty, University of Bihac,Bihac, Bosnia and Herzegovina. M. Burzić, University of Belgrade, I.C. Faculty of Mechanical Engineering, Belgrade, Serbia. In present paper, experimental investigations have included the eff ect of exploitation conditions (exploitation time and temperature) o...

Initiation of corrosion on reinforcing bars occurs when a critical chloride concentration is achieved. A universal value for the chloride concentration that causes depassivation has not been agreed upon for carbon steels due to a variety of experimental factors. The chloride threshold depends on the rebar material, rebar surface condition, testing environment, method of detection, definition of...

OBJECTIVE (1) Determine whether tuning fork material (aluminum vs stainless steel) affects Rinne testing in the clinical assessment of conductive hearing loss (CHL). (2) Determine the relative acoustic and mechanical outputs of 512-Hz tuning forks made of aluminum and stainless steel. STUDY DESIGN Prospective, observational. SETTING Outpatient otology clinic. SUBJECTS AND METHODS Fifty su...