Numerical investigation was performed on NACA 0015 which is a symmetric airfoil. Pressure distribution and then lift and drag forces are verified. Changing of ground clearance was a considerable point. Also the angle of attack was changed from 0° to 10°. Pressure coefficient reaches its higher amounts on the wing lower surface when the ground clearance diminishes. Increment of the angle of atta...

Ground settlement is often the most serious concern when tunneling under an old city with numerous historic monuments. A successful engineering design under these conditions would require getting the most out of the ground strength parameters and avoiding any weakening maneuver throughout the operation. Knowing that surface settlement is highly affected by tunneling parameters in EPB shield tun...

full factorial experimental design (23) for the evaluation of slurry ethylene polymerization in the presence of an industrial ticl4/mgcl2 ziegler-natta catalyst was employed. the following parameters were used as independentvariables: al/ti molar ratio, reaction temperature and hydrogen partial pressure. the total polymerization pressure was 9 bar. catalyst activity, mfi (melt flow index) and m...

the purpos of this paper is to aim the maximum heat transfer rate in a plate-fin heat exchanger with a constant volume and a contant surface area at a prescribed pressure drop. this paper propose a method for design a plat-fin heat exchanger in which a maximum pressure drop occurs at a constant volume and surface are. in this paper as a case study, a preheater of a gas turbine which is a plate-...

The main purpose of this study is the survey of the atmospheric low pressure effects at sea level oscillations in the Qeshm Channel. For this purpose, the curves of the pressure on the Persian Gulf and Oman Sea, during the passing of the atmospheric low pressure system, are extracted across the region. During the time of occurrence of these events, sea level oscillations in the coastal areas of...

ground settlement is often the most serious concern when tunneling under an old city with numerous historic monuments. a successful engineering design under these conditions would require getting the most out of the ground strength parameters and avoiding any weakening maneuver throughout the operation. knowing that surface settlement is highly affected by tunneling parameters in epb shield tun...

many metal forming problems have been solved using the slip line field method but all of them have either been two-dimensional (plane strain or plain stress) or axisymmetric problems. in this paper a procedure has been proposed by which the slip line field solution to three dimensional problems of metal forming becomes possible. for this purpose the extrusion of shaped sections has been taken a...