نتایج جستجو برای: tube well water
تعداد نتایج: 2076890 فیلتر نتایج به سال:
in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...
gol-e-gohar iron ore mine of sirjan in southern part of iran is a large open pit that operates below the groundwater table and during mining operation, dewatering is required to prevent operation processes from flooding. current operation is going on by digging wells in or out of the pit and pumping to prevent flooding. as a result of the former dewatering operation a vast deep cone of depressi...
Two-phase flow regimes are affected by conduit position, alignment, geometry, flow direction, physical characteristics, and flow rate of each phase as well as the heat flux toward the boundaries. Due to the importance of two-phase flow, numerous regimes have been identified. The first step in studying micro-bubble formation inside a venturi tube is to recognize the type of flow regimes. In this...
Recent in vitro studies have suggested a potential role for antimony as a confounder in human health studies related to arsenic in drinking water. We measured tube-well water concentrations of antimony and arsenic in the Pabna region of Bangladesh, where arsenic concentrations are known to be elevated and the concentrations of antimony have not yet been thoroughly documented. Two hundred forty-...
A capillary chromatography system has been developed based on the tube radial distribution of the carrier solvents using an open capillary tube and a water-acetonitrile-ethyl acetate mixture carrier solution. This tube radial distribution chromatography (TRDC) system works under laminar flow conditions. In this study, a phase diagram for the ternary mixture carrier solvents of water, acetonitri...
The wear of the focusing tube is a very important feature of the abrasive water jet machining. Of all rejected focusing tubes, 85% are worn. Similary, the age of focusing tube influences the cut geometry and quality of machined surface. With regard to the stated, wearing of the focusing tube is subject of this paper. Focusing tube outlet diameter was measured as well as its influence on the sur...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید