this study deals with the 3d recovering of magnetic susceptibility model by incorporating the sparsity-based constraints in the inversion algorithm. for this purpose, the area under prospect was divided into a large number of rectangular prisms in a mesh with unknown susceptibilities. tikhonov cost functions with two sparsity functions were used to recover the smooth parts as well as the sharp ...

nowadays acoustic emission (ae) testing based on the kaiser effect (ke) is increasingly used to estimate the in-situ stress in laboratories. in this work, this effect is assessed on cylindrical specimens in numerical simulations of the cyclic loadings including loading, unloading, and re-loading cycles using a 3d code called the particle flow code (pfc) based upon the distinct element method. t...

local scouring around bridge piers is a natural phenomenon caused by the erosive process of flowing stream on alluvial beds. the 3d flow field around bridge piers interacting with the bed materials increases complexity of local scour process. the local scour depth develops in accelerated flows and if it is not predicted correctly, the bottom level of local scour hole will exceed the original le...

This paper deals with the modeling of punching shear failure in reinforced concrete slabs using nonlinear finite element analysis. The 3D finite element analyses (FEA) were performed with the appropriate modeling of element size and mesh, and the constitutive modeling of concrete. The FE numerical models are validated by comparing with the experimental results obtained from tested specimens and...

This paper modeled heating air of a room through examining free convection in a 3D chamber. The chamber had cold and hot sources with Tc and Th temperatures, respectively. Its other walls were adiabatic. This study aimed at predicting effect of temperature difference, displacement of hot and cold sources and their aspect ratio on flow field, temperature and heat transfer rate. To conduct the st...

A new modeling approach is presented to improve numerical simulations of groundwater flow and contaminant transport in fractured geological media. The approach couples geological and numerical models through an intermediate mesh generation phase. As a first step, a platform for 3D geological modeling is used to represent fractures as 2D surfaces with arbitrary shape and orientation in 3D space....

a numerical study of 3d electrokinetic flows through micromixers was performed. the micromixers considered here consisted of heterogeneous rectangular microchannels with prescribed patterns of zeta-potential at their walls. numerical simulation of electroosmotic flows within heterogeneous channels requires solution of the navier-stokes, ernest-plank and species concentration equations. it is kn...

In this study, a novel numerical method is proposed for determination of mode-I interlaminar fracture toughness, GIc, in multi-directional (MD) double cantilever beam (DCB) specimens using fracture properties of unidirectional DCB specimens. Two factors, β and Dc are defined to minimize the undesirable effects on strain energy release rate. β describes the difference between maximum and average...